Can water main to house have bends?
#1
Member
Thread Starter
Join Date: Jun 2007
Location: Burbank
Posts: 3
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Can water main to house have bends?
We currently have a straight line from the street meter underground to where it rises up to the pressure regulator and then into the house. This is placed precisely in the middle of where a new deck will be, and I need to relocate this about 10 feet to the edge of the house. One consideration is that the water pressure is extremely high here; about 150 psi.
Can I reconfigure this so it goes straight up, then does a 45 degree bend, then a straight line to where it intercepts the new location, followed by anotehr 45 degree bend and a final straight line? Or do I have to have the city relocate the water meter so that it can go straight to the house?
Thanks.
Can I reconfigure this so it goes straight up, then does a 45 degree bend, then a straight line to where it intercepts the new location, followed by anotehr 45 degree bend and a final straight line? Or do I have to have the city relocate the water meter so that it can go straight to the house?
Thanks.