brass compression fitting to cpvc


  #1  
Old 08-28-17, 01:33 PM
D
Member
Thread Starter
Join Date: Feb 2003
Location: New York, United States
Posts: 360
Upvotes: 0
Received 0 Upvotes on 0 Posts
brass compression fitting to cpvc

Found a double shut off that need to supply two 3/8 od supplies and has a 1/2 compression fitting, can that brass compression fitting be attached to cpvc pipe? I would think so but just want to make sure.
Always appreciate the help.
 
  #2  
Old 09-02-17, 12:24 AM
steve_gro's Avatar
Member
Join Date: Jan 2004
Location: San Francisco
Posts: 967
Upvotes: 0
Received 1 Upvote on 1 Post
Well, since you haven't gotten any answers (and may have already figured it out on your own) I'll just say that any compression double-stop that I've ever seen has been for copper. It wouldn't fit on CPVC. Not to say that such a comp stop doesn't exist, just I've never seen one.

A Brasscraft angle stop for CPVC glues onto the water supply and uses a rubber washer, like so:



They probably make a double,
 
  #3  
Old 09-03-17, 06:29 AM
Z
Forum Topic Moderator
Join Date: Sep 2005
Location: USA
Posts: 5,997
Received 401 Upvotes on 356 Posts
You can use a standard angle stop and a 'splitter' to connect two fixtures.

Something like this:
https://www.amazon.com/dp/B007PT0YXW
 
 

Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description:
Your question will be posted in: