Pool and spa heater

Reply

  #1  
Old 01-23-06, 10:44 AM
Member
Thread Starter
Join Date: Jan 2006
Posts: 1
Pool and spa heater

I tried to heat the jacuzzi yesterday but couldn't get the heater to light. Unit is an older Raypak heater and I requested an owners manual today. The problem is when I turn the unit on I can hear the electronic ignition clicking and can see it spark but the gas never catches. I don't smell any gas and have checked the entire gas line and the valves are all open. I have also cleaned all of the filters to make sure that wasn't stopping flow. Any suggestions? You can email me back at [email protected]. Thanks!
 
Sponsored Links
  #2  
Old 01-29-06, 05:55 PM
Member
Join Date: Nov 2004
Location: USA
Posts: 164
Check the orifices on the burner tray, spiders love to make nest in them. Make sure the gas is off before cleaning out the orifices.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes
'