Hi, I'm trying to replace the motor that burned out (my vacation help wasn't keeping track of the water level); I tried removing the 4 bolts holding it on, and it isn't budging; Do I need holy water or something? appreciate any help you may have. John:wall:

I have a natural gas pool/spa heater where it goes through its normal startup process - the blower comes on, and goes through 3 attempts and fails with the AGS Service code. The only thing I did different from last year before attempting to turn on the heater last night was turning the gas off via the valve at the gas meter. I opened the front door and inspected the flame sensor and ignitor where they both look fine - very little use on this heater. I tried to fire up the heater again with the door open and never smelled gas - the gas valve is in the on position. Any way to inspect if gas is making it through the valve? or any other suggestions?