pool pump rebuilding

Reply

  #1  
Old 05-27-08, 04:22 PM
Jim-426's Avatar
Member
Thread Starter
Join Date: Jan 2007
Posts: 41
pool pump rebuilding

We have a 1 1/2 hp Hayward pump for a above ground swimming pool. The niose that is coming from this motor could and or is disrupting the fine folks of Mars. New bearings seem to be the answer. How can I do this? Impeller seems to be pressed on. And where do I get parts? Really would like not to buy a new pump/motor since this one is in great shape minus the motor.
Thanks
Jim
"Lifes not too Short. Its your Dead for So Long"
 
Sponsored Links
  #2  
Old 05-29-08, 07:23 AM
Jim-426's Avatar
Member
Thread Starter
Join Date: Jan 2007
Posts: 41
Smile

Well after some investigating, seems that Just need two 6203 bearings. Took motor apart and when bearings arrive re-assemble motor to spec. Bearings shipped to my door of a cost $7.00. I have about 1 hour labor into it so thats better than $200.00 for new motor.
Jim
Life's not Short, your Dead for so Long..
 
  #3  
Old 06-02-08, 07:37 AM
Jim-426's Avatar
Member
Thread Starter
Join Date: Jan 2007
Posts: 41
Recieved new bearings are installed and motor back together and running like new
Jim
Lifes not Short, It's your Dead for So Long.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes
'