Go Back  DoItYourself.com Community Forums > Garden and Outdoor Center > Pools, Spas and Hot Tubs
Reload this Page >

change electrical pigtail on hayward pool pump

change electrical pigtail on hayward pool pump


  #1  
Old 07-16-08, 07:25 PM
J
Member
Thread Starter
Join Date: Jul 2008
Posts: 1
Upvotes: 0
Received 0 Upvotes on 0 Posts
change electrical pigtail on hayward pool pump

I need to change the pigtail on my hayward pump, because it is shorting out.
It looks like the the end cap should come off but it does not want to loosen up after I take out the 2 screws. Anybody have any suggestions?? I fear it might be a self contained unit and does not come apart!!
 
  #2  
Old 07-16-08, 08:49 PM
todrut's Avatar
Member
Join Date: Jun 2007
Location: USA
Posts: 1,068
Upvotes: 0
Received 0 Upvotes on 0 Posts
There are 3 screws that hold it on. It will come off but sometimes needs persuading. A small flat tip screwdriver and hammer will loosen it around motor.
 
 

Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description:
Your question will be posted in: