LX400 heater issues


Old 08-16-08, 09:09 AM
Thread Starter
Join Date: Aug 2008
Posts: 2
LX400 heater issues

I disconected the propane tank to move the tank. when I hooked everything back up, and tried to turn on the heater,the blower works and the unit seems to run thru its motions and the the ingiter glows but the chambers don't lite up! I think the gas is not getting past the gas valve to the chambers. the valve is turned to on position. its a waterpix laars lx400. any ideas please post.
Sponsored Links
Old 08-16-08, 11:29 AM
todrut's Avatar
Join Date: Jun 2007
Location: USA
Posts: 1,212
did you bleed the air out of line?
Old 08-16-08, 02:07 PM
Thread Starter
Join Date: Aug 2008
Posts: 2

I have checked the screw before the valve and gas is present but after the valve on the burner line i dont smell any gas! its comming up with a ags error code. but im not sure all i did was disconect to move the propane tank. if thats not the bleeding let me know how to bleed....thanks

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Thread Tools
Search this Thread
Display Modes