AG Pool structural Parts
#1
Member
Thread Starter
Join Date: Dec 2005
Location: United States
Posts: 89
Upvotes: 0
Received 0 Upvotes
on
0 Posts
AG Pool structural Parts
Looking to replace the liner,top rails & rail brackets to a 24" AG pool. Anyone know a place that sells structural parts?
#2
Banned. Rule And/Or Policy Violation
Join Date: Feb 2009
Posts: 1
Upvotes: 0
Received 0 Upvotes
on
0 Posts
All metallic parts of the pool structure, including the reinforcing metal of the pool shell, coping stones, and deck, shall be bonded. The usual steel tie wires shall be considered suitable for bonding the reinforcing steel together, and welding or special clamping shall not be required. These tie wires shall be made tight. If an encapsulating non conductive compound effectively insulates reinforcing steel at the time of manufacture and installation, it shall not be required to be bonded. Where reinforcing steel is encapsulated with a non conductive compound, provisions shall be made for an alternate means to eliminate voltage gradients that would otherwise be provided by bonded reinforcing steel.
NO ADS!
NO ADS!
Last edited by Shadeladie; 02-27-09 at 11:31 AM. Reason: Link removed. Advertising not allowed.