Aquarite Generator Showing Low salt
#1
Member
Thread Starter
Join Date: Jun 2009
Location: California, USA
Posts: 2
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Aquarite Generator Showing Low salt
I have an Aquarite Generator that is about 3 years old, cell # is 5E0506-2076076, it wants to work, but it is not sensing the correct salt level ( it is showing 1900 instantaneous and I am getting 2800 on test strips, which corresponds to 450 pounds of salt for a 22,000 gallon pool) and shuts down, I have verified my salt levels and actually drained and refilled the pool thinking that high solids may interfere with an accurate reading.
Is there some way I can bypass this feature to keep it running versus replacing the cell?
Any help or advice would be appreciated.
Is there some way I can bypass this feature to keep it running versus replacing the cell?
Any help or advice would be appreciated.