Go Back  DoItYourself.com Community Forums > Garden and Outdoor Center > Pools, Spas and Hot Tubs
Reload this Page >

filter guage reads 0 after filter grid replacement.

filter guage reads 0 after filter grid replacement.

Reply

  #1  
Old 09-24-09, 07:34 PM
Member
Thread Starter
Join Date: Sep 2009
Location: So Cal
Posts: 2
filter guage reads 0 after filter grid replacement.

Changed all grids but 2 on a Pentair FNS and they looked good. put back together just like always and fired up the pump and added DE. No PSI...... take apart and inspect EVERYTHING 2 more times and still nothing?

Thanks for the feedback.
 
Sponsored Links
  #2  
Old 09-24-09, 07:41 PM
todrut's Avatar
Member
Join Date: Jun 2007
Location: USA
Posts: 1,212
sounds like a bad guage, simply replace guage
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes
'