Install Dexter Deadbolt

Reply

  #1  
Old 06-16-08, 03:48 PM
Member
Thread Starter
Join Date: Jun 2008
Posts: 1
Install Dexter Deadbolt

I bought a dexter JD62 double cylinder deadbolt. I have been trying to install it, but am extremely confused because it came with 4 small pins. Nothing in the instructions says what to do with the pins. It looks like one goes into the outside cylinder and one on the inside, but they are too wide to fit more than one through the lock?
Can I please get some help?
Thanks-
 
Sponsored Links
  #2  
Old 06-16-08, 07:06 PM
GlobalLocky's Avatar
Member
Join Date: May 2006
Location: USA
Posts: 925
I'm having difficulty understanding what these four "pins" are. None of the exploded view diagrams display any 4 pins.

Are they small (like tumblers in the lock)?

Remember, to always install the cylinders with the deadbolt in the locked position.

It is vitally important to line the connecting tails up, so that they can move freely when connected (timing).
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes
'