Sealing Metal to Composite Flat Roof Seam


  #1  
Old 03-13-09, 11:47 AM
M
Member
Thread Starter
Join Date: Jan 2009
Location: NC
Posts: 58
Upvotes: 0
Received 0 Upvotes on 0 Posts
Sealing Metal to Composite Flat Roof Seam

 
  #2  
Old 03-13-09, 08:38 PM
tinner666's Avatar
Member
Join Date: Apr 2007
Location: Richmond, Va.
Posts: 154
Upvotes: 0
Received 0 Upvotes on 0 Posts
Remove the shingles along that edge, bend 3/4" of the metal back on itself about 170 degrees to form a channel. Install new shingles that overlap the hem by 3", and cut, at an angle, the unexposed portion of the shingles so NO part of the top of the shingle is lying flat on the roof.
 
 

Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description:
Your question will be posted in: