Window Bay Roof replacement

Reply

  #1  
Old 11-13-17, 03:27 AM
Member
Thread Starter
Join Date: Nov 2017
Posts: 2
Window Bay Roof replacement

I got a roofer in to change the old lead to felt. Can anybody tell me if this is a job properly done? Thank you.

Mod note: member in UK
 
Attached Images      

Last edited by Shadeladie; 11-13-17 at 07:55 AM. Reason: Added location
Sponsored Links
  #2  
Old 11-13-17, 07:47 AM
Member
Join Date: Jan 2011
Location: USA
Posts: 4,183
Does not look right to me for a few reasons.
He left it to short in the first picture.
Not tight to the brick in the second picture, and I would have cut into the vertical mortar and tabbed it over on the end of the piece so there was no gap left open. (Tabbed = bend)
4 and 5 look to me like he has the overlaps in the wrong direction, he should have started at the lowest point of the roof and done that high area last so water will run away from the joint not under it.
 
  #3  
Old 11-14-17, 01:40 AM
Member
Thread Starter
Join Date: Nov 2017
Posts: 2
thank you so much for your answer, joe. that is very helpful. have a glorious day.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes