Hi All, An immediate disclaimer -- I know absolutely nothing about roofs. I have a roof vent (please see an attached picture). Is it possible to take the cap off the vent? I am trying to route an antenna cable through it. Thanks. [img]https://cimg2.ibsrv.net/gimg/www.doityourselft.com-vbulletin/1228x949/image_d39523af822b1e9b6b8b5e477b7f92ff252cd90d.jpg[/img]

Alumimun insulated roof on Florida room. The leak is at the point where the exterior wall meets the metal roof panel. As you can see, the roof, with insulation under it, doesn't even extend to the end of the roof. The panels are 10'4" and the roof is 12". Who knows why, but it is not uncommon on doublewide mobile homes here in Florida. I replaced the jalousie windows and kept the aluminum frame above the windows. I have resealed all the roof screws that attach at this point. Still leaks in several places. See white tapes in pic-1 shows 2 of 7 places that leak. I actually used caulk, before I noticed the leak, to reduce any air from entering. I noticed the leak after heavy rains. Looking for ideas or suggestions. [img]https://cimg2.ibsrv.net/gimg/www.doityourselft.com-vbulletin/576x432/leaking_pic_1_37732f596427f4807930601e96245946d795fe77.jpg[/img] [img]https://cimg3.ibsrv.net/gimg/www.doityourselft.com-vbulletin/923x667/low_res_roof_pic_2_142e2f2019d9b06890f8060dce5c221920e7600f.jpg[/img]