Search: Posts Made By: bambiblaster
Showing results 1 to 25 of 200
Search took 0.02 seconds.
Replies: 6
Views: 2,544
Posted By bambiblaster

Did you ever let it run till the end on its own...

Did you ever let it run till the end on its own and if so did it dry the dishes,, If did no dry there is a heater problem not keeping the water hot. There should be a tech diagnose sheet behind the...
Replies: 2
Views: 1,129
Posted By bambiblaster

Tks Roger... New battery and turns freely.. just...

Tks Roger... New battery and turns freely.. just talked to a lg tech and he comfirmed what I thought.. compression release on cam is worn. He has run into this on the 18.5 Briggs often..
Replies: 2
Views: 1,129
Posted By bambiblaster

Tractor starter

Have a B&S engine on a Craftsman Lawn Tractor. The starter magnets came loose in starter so I purchased another starter now this starter worked for 2 weeks now it is not working. Turns freely but...
Replies: 1
Views: 793
Posted By bambiblaster

If its a older fridgidaire the boot is a update...

If its a older fridgidaire the boot is a update kit and comes with instructions... Dont know which you have I see you left no model number
Replies: 1
Views: 1,219
Posted By bambiblaster

Sounds like the cycle speed selector switch is...

Sounds like the cycle speed selector switch is stuck in a gentle setting... The wiring diagram in the console will show what contacts on that switch to test are..
Replies: 1
Views: 1,072
Posted By bambiblaster

Can you just build a shelf to slide the dryer...

Can you just build a shelf to slide the dryer onto above the washer ... also look at yours goto a diff store and look for yourself and see if they match... i thought they fit unless yours is really...
Replies: 9
Views: 5,047
Posted By bambiblaster

Unplug and open console there is a tech sheet on...

Unplug and open console there is a tech sheet on tests for this maching.... also you can tip it back unplug motor electrical connection and reinsert and try...
Replies: 1
Views: 3,266
Posted By bambiblaster

Should be 3.1.........

Should be 3.1.........
Replies: 8
Views: 5,918
Posted By bambiblaster

Had one of there the other day,, The control...

Had one of there the other day,, The control board relay was fried... had to put in a new control...
Replies: 8
Views: 5,918
Posted By bambiblaster

Can you get the model number from inside door......

Can you get the model number from inside door... there could be a few different problems depending on model
Replies: 6
Views: 1,611
Posted By bambiblaster

Yes should be the timer... On the sudden stop...

Yes should be the timer... On the sudden stop "dont put oil or any lube on the clutch" this will make it slip in the spin cycle.. the clutch releases the brake which is also what drives the basket...
Replies: 2
Views: 1,880
Posted By bambiblaster

You will be needing rear drum/bearing and most...

You will be needing rear drum/bearing and most likely the spin basket... There are alot of post in here about the front loader rear bearing.. just a matter of tackling it and the costs
Replies: 5
Views: 10,880
Posted By bambiblaster

I would replace the heater housing therma fuse as...

I would replace the heater housing therma fuse as well...Especilly with that much shorting goin on,...


Dave,

Something aint it... I ve run accross alot of those..

Sane with dishwashers...
Replies: 2
Views: 1,458
Posted By bambiblaster

Yes there shoukd be a spring too.. remove the...

Yes there shoukd be a spring too.. remove the door hinge screws and the 2 on the otherside will give you acess to the inside...you can pull the boot off the inner door, it just presss in,, here is...
Replies: 5
Views: 10,880
Posted By bambiblaster

From what i gather so far you removed the three...

From what i gather so far you removed the three screws in the back of drum.. You should have removed belt and reached in drum and hit it hard upward in the rear to knock out the ball in the soccket...
Replies: 2
Views: 3,382
Posted By bambiblaster

Here is step by step to disasseble yours ...

Here is step by step to disasseble yours


http://www.applianceaid.com/wpdryer_how-to.html

Pics

http://www.applianceaid.com/slidewpdry.html
Replies: 5
Views: 4,667
Posted By bambiblaster

Sears has the motor for 183.00 pt # 27658P...

Sears has the motor for 183.00 pt # 27658P...
Replies: 4
Views: 1,158
Posted By bambiblaster

In reference to the original posting that site I...

In reference to the original posting that site I gave you has other info on the bearing and other possible shaking issues..


http://www.servicematters.com/maytag_library/html/index.html
Replies: 6
Views: 12,640
Posted By bambiblaster

There are a couple of issues you could be...

There are a couple of issues you could be having...

1. A bad motor relay in the console..

2. Bad even heat board..

Here is a link to test this dryer...
...
Replies: 1
Views: 834
Posted By bambiblaster

Try some disposer cleaner and run it... most...

Try some disposer cleaner and run it... most likely the renters have put everything in there to include oil and greese...And there is also a possible drain pipe problem
Replies: 4
Views: 5,444
Posted By bambiblaster

Usually caused by a loose connection... seen it a...

Usually caused by a loose connection... seen it a few times but not too often,,,,
Replies: 4
Views: 5,444
Posted By bambiblaster

Usually caused by a loose connection... seen it a...

Usually caused by a loose connection... seen it a few times but not too often,,,,
Replies: 1
Views: 1,750
Posted By bambiblaster

Remove the 2 lower screws on te panel to look...

Remove the 2 lower screws on te panel to look from bottom and also remove 4 screws from rear of top to remove it and look...
Replies: 4
Views: 5,444
Posted By bambiblaster

You will need remove 2 rear left and right corner...

You will need remove 2 rear left and right corner screws on the back of console to open it up.. disconnect the switch and insert a bypass wire on the 2 outside wires and wee if it works.. if so...
Replies: 4
Views: 1,450
Posted By bambiblaster

your water sound is at the top of the basket......

your water sound is at the top of the basket... you may want to remove your agitator and bell cup to check for a upper oil leak..ref link below

...
Showing results 1 to 25 of 200
 


 
Forum Jump