Search: Posts Made By: Murph49
Showing results 1 to 16 of 16
Search took 0.01 seconds.
Replies: 8
Views: 1,411
Posted By Murph49

Thanks for your help. I'm going to replace the...

Thanks for your help. I'm going to replace the brake hose. That sounds like a real possibility.
Replies: 8
Views: 1,411
Posted By Murph49

If the caliper doesn't leak and it seems to work...

If the caliper doesn't leak and it seems to work when I pump the pedal is there a better way to test it? Also if the brake hose is collapsing should I be able to see that or just change it as a...
Replies: 8
Views: 1,411
Posted By Murph49

Not sure I understand what the sliders are? I did...

Not sure I understand what the sliders are? I did clean up the spring like clips that hold the pads and I tested the calipers to be sure they were not stuck
Replies: 8
Views: 1,411
Posted By Murph49

Gmc jimmy rear brake pads

Just replaced rear brake pads and right side rotor on my 2000 gmc jimmy and I noticed the right sides were worn down to the rivets and the left side was only worn about half way. No leaks that I...
Replies: 3
Views: 996
Posted By Murph49

Ezgo lights

Thanks for the info. I've been looking at internet sites and aftermarket catalogs. Sure I will find the right one
Replies: 3
Views: 996
Posted By Murph49

EZGO light kit install

I have a 2010 EZGO txt cart and I am going to install a light kit. I want to include turn signals, flasher and brake light also. It already has a horn installed. I'm handy with electrical wiring and...
02-01-14, 07:25 PM
Replies: 14
Views: 1,358
Posted By Murph49

Thank you very much, I'll wait to hear from them.

Thank you very much, I'll wait to hear from them.
02-01-14, 06:55 PM
Replies: 14
Views: 1,358
Posted By Murph49

Thanks very much for the info and the link to...

Thanks very much for the info and the link to specs. Can you recommend how I might check to see if it's wired correctly or if the second stage is not set to come on? I'm pretty handy with the...
02-01-14, 02:35 PM
Replies: 14
Views: 1,358
Posted By Murph49

Model number for furnace

The model number I found on a tag beside the burner is

TUD100R9V5K4
Serial number 5405JHL1G
Date of manufacture. 10/2005

I also saw a tag that I think says the furnace is eighty percent...
02-01-14, 05:08 AM
Replies: 14
Views: 1,358
Posted By Murph49

When the tstat and wiring were changed last year...

When the tstat and wiring were changed last year they added an outside temp sensor and it was wired for that. What started happening this winter was that the aux heat would come on but the fan...
01-31-14, 09:05 AM
Replies: 14
Views: 1,358
Posted By Murph49

I can remove the Tstat if you really think I need...

I can remove the Tstat if you really think I need to. I have verified that when the aux heat is on the furnace burners are lit up in the attic and the heat pump is completely shut off. It may not be...
01-31-14, 05:32 AM
Replies: 14
Views: 1,358
Posted By Murph49

The furnace is running by itself. When aux heat...

The furnace is running by itself. When aux heat comes on the heat pump is shut down outside fan no running. T-stat is a trane(Honeywell) TCONT 800 series. The system uses something called a fossil...
01-30-14, 10:23 AM
Replies: 14
Views: 1,358
Posted By Murph49

Sorry if I misstated the facts. It is an XV80 but...

Sorry if I misstated the facts. It is an XV80 but powered by propane. I measure the outlet temp at the furthest away duct and it is typically between 82 and85 when the furnace is on depending on the...
01-30-14, 06:17 AM
Replies: 14
Views: 1,358
Posted By Murph49

Back up heat can't hold temp

I have a traneXl14i heat pump with trane XV80 furnace for backup. In colder weather 5-17 degrees the backup heat runs constantly and often loses two degrees or more overnight. When temp rebounds to...
01-25-14, 06:57 AM
Replies: 1
Views: 1,257
Posted By Murph49

Additional information

Forgot to add...... Once aux heat kicks in at night system seems to stay on aux all night and into next day until temp rises above about 30-32. Once that happens heat pump works fine and maintains...
01-25-14, 06:04 AM
Replies: 1
Views: 1,257
Posted By Murph49

Heat pump backup furnace not holding set temp

I have a Trane XL14i heat pump system with propane furnace backup system XV80? seems to be working fine with one exception. When the overnight temp drops to around 11-14 degrees (which is not often...
Showing results 1 to 16 of 16


 
Forum Jump