Search: Posts Made By: crb1077
Showing results 1 to 15 of 15
Search took 0.01 seconds.
Replies: 55
Views: 2,384
Posted By crb1077

Ok guys, I want to extend a very sincere thank...

Ok guys, I want to extend a very sincere thank you for helping me through this process. My wife is on the mower cutting the grass now.

I also want want to give a most humble apology for wasting...
Replies: 55
Views: 2,384
Posted By crb1077

There is no voltage at B nor is there voltage on...

There is no voltage at B nor is there voltage on either side of the main fuse, it was actually flashing a negative symbol.

I’m getting 2.2 ohms on the clutch and no reading at all on the wires...
Replies: 55
Views: 2,384
Posted By crb1077

When testing the ohms at the clutch I’m getting...

When testing the ohms at the clutch I’m getting .5 on the ground and no reading on the positive.
Replies: 55
Views: 2,384
Posted By crb1077

Geochurchi...

Geochurchi (https://www.doityourself.com/forum/search.php?do=finduser&u=502203), no power at all at the switch. Would an oil switch keep it from starting?

I use use to be able to raise and lower...
Replies: 55
Views: 2,384
Posted By crb1077

Geochurchi...

Geochurchi (https://www.doityourself.com/forum/search.php?do=finduser&u=502203), no. I’m not getting voltage off the red wire regardless of where the key is. I do have continuity between B and S...
Replies: 55
Views: 2,384
Posted By crb1077

BHFixit, I have that but it’s so blurry I can’t...

BHFixit, I have that but it’s so blurry I can’t tell what’s what. I tried finding a better one online and emailed the company with no success.
Replies: 55
Views: 2,384
Posted By crb1077

Finally got some time to work on the mower and...

Finally got some time to work on the mower and here’s the latest.

I tested tge the voltage and there is NO voltage regardless of where the key is turned from any wire on the PTO switch.

I...
Replies: 55
Views: 2,384
Posted By crb1077

The PTO switch was definitely the problem but...

The PTO switch was definitely the problem but replacing it hasn’t fixed it.

The switch short circuited and a wire burned through the housing. I’m assuming that this is causing issues down the...
Replies: 55
Views: 2,384
Posted By crb1077

I’m jumping it by bridging the positive into the...

I’m jumping it by bridging the positive into the solenoid with the small wire coming out of the solenoid.

I don’t know if this is an indication of something else but runs for shorter periods of...
Replies: 55
Views: 2,384
Posted By crb1077

I tested the ignition switch incorrectly and...

I tested the ignition switch incorrectly and ended up breaking it so I replaced it.
Replies: 55
Views: 2,384
Posted By crb1077

Ok guys, here’s the latest. I installed an...

Ok guys, here’s the latest.

I installed an incompatible ignition switch witch and was holding off on posting until the new one came in hoping it would fix it. It did not. I can jump the mower but...
Replies: 55
Views: 2,384
Posted By crb1077

Replacing the battery hasn’t fixed it. Same...

Replacing the battery hasn’t fixed it. Same symptoms. The serial number is BZE602KO07151164
Replies: 55
Views: 2,384
Posted By crb1077

There’s a wire from the negative that goes into a...

There’s a wire from the negative that goes into a relay.

the battery was bad so hopefully that was the only issue and all is well.

Thanks for the input.
Replies: 55
Views: 2,384
Posted By crb1077

Thanks guys. What i can tell you is this, the...

Thanks guys. What i can tell you is this, the connections are good and clean and tight.

The voltge readings are 12.77 at the terminals and positive end of the solenoid.

The negative does NOT...
Replies: 55
Views: 2,384
Posted By crb1077

Good battery but dead motor

My wife was mowing and shut off the mower. I then went to go mow another part and it wouldn’t start, just click. Eventually it wouldn’t even click. The battery is fully charged. I’ve replaced the...
Showing results 1 to 15 of 15


 
Forum Jump