Search: Posts Made By: boxtwo
Showing results 1 to 6 of 6
Search took 0.01 seconds.
Replies: 9
Views: 1,254
Posted By boxtwo

FIXED!!! The float needed to be adjusted....

FIXED!!!

The float needed to be adjusted. That was it. Once done correctly, it fired on the second pull.

Thanks for the help!
Replies: 9
Views: 1,254
Posted By boxtwo

I pulled the carb AGAIN with the fuel line still...

I pulled the carb AGAIN with the fuel line still attached. Rattled, no noise inside. Tapped carb, no change and no fuel. Pulled apart with fuel line still attached and found that the float is binding...
Replies: 9
Views: 1,254
Posted By boxtwo

Fires with fuel in plug hole then dies. I can...

Fires with fuel in plug hole then dies. I can pull the needle at the base of the emulsion tube and there is no fuel coming out.
Replies: 9
Views: 1,254
Posted By boxtwo

Thanks! In doing a bit more research, it sounds...

Thanks! In doing a bit more research, it sounds as if fuel level may come into play. As fuel tank level, filter placement, line angle/length, etc. I know the fuel tank has less than 1/2 in it. With a...
Replies: 9
Views: 1,254
Posted By boxtwo

Thanks marbobj. So I understand correctly, with...

Thanks marbobj. So I understand correctly, with the carb in half, attach fuel line, hold below level of fuel tank and turn on fuel to check float. That will determine whether the float and needle is...
Replies: 9
Views: 1,254
Posted By boxtwo

8HP B&S Engine issues on TB Tiller

Hi all! I have been searching for a resolution for several days and have not had success resolving my issue.

The details
New to me Troy Built Horse Tiller (Likely a Horse 3, SN 573211)
Briggs...
Showing results 1 to 6 of 6


 
Forum Jump