Search: Posts Made By: dclegg12
Showing results 1 to 25 of 29
Search took 0.01 seconds.
Replies: 2
Views: 888
Posted By dclegg12

Question need some advice

OK guys maybe someone can help. Here is what I have a customer wants to secure multiple mowers in front of his store with a wire locking mechanism that if cut or broke will activate the alarm can...
Replies: 17
Views: 5,202
Posted By dclegg12

only 1 rf keypad

just a word of advice you can only use one rf receiver on the 1616 and that will support up to 32 wireless zones if you put two on it it will give you issues.
Replies: 10
Views: 1,475
Posted By dclegg12

using 05 and 06

i know everyone may be different but the only time i use 06 for a motion is when the motion has a chance of catching the homeowner coming in the entry/exit door
Replies: 36
Views: 39,309
Posted By dclegg12

not the best but will work

leaving the jack on and crimping an rj45 on the new cable u ran will work may not be the best idea but it will work and will keep the cat5 integrity of the cable
Replies: 3
Views: 913
Posted By dclegg12

i use one made by bufallo electronics that works...

i use one made by bufallo electronics that works great cost a lot less uses a cat5 cable then mount an eye anywhere you can get cabling to it and that is the best way i have found for concealing...
Replies: 2
Views: 943
Posted By dclegg12

question for the knowledgable

i have a customer who has a flat screen mounted above the fireplace and wants all of his components mounted in a cabinet across the room (satellite box, surround sound receiver, dvd and vcr what...
Replies: 1
Views: 1,292
Posted By dclegg12

help on louisiana laws

i have an alarm company in mississippi but have recently been asked to do an alarm in louisiana for a homeowner/friend and also doing a cctv system for a business in louisiana also can someone maybe...
Replies: 6
Views: 4,815
Posted By dclegg12

ok you definately sound like you could help me...

ok you definately sound like you could help me and i have a usrobotics router there now so if there is any way could you go step by step on what i need to do you can email me at <Email address...
Replies: 6
Views: 4,815
Posted By dclegg12

as of right now he does not connect to anything...

as of right now he does not connect to anything at the office from off site but is that what i am going to have to do is run some sort of vpn software on a computer on the network and give him access...
Replies: 9
Views: 2,350
Posted By dclegg12

i had the same problem on an 832 used two...

i had the same problem on an 832 used two different wires both connected at the panel but only the fixed icon would work led would not so i took a short piece of wire connected to back of fixed icon...
Replies: 6
Views: 1,704
Posted By dclegg12

what you need to do is unscrew all of the wires...

what you need to do is unscrew all of the wires coming from the house and see if dial tone appears if so then start putting one wire at a time back on the terminals until it goes away if you have...
Replies: 6
Views: 4,815
Posted By dclegg12

everfocus dvr ip addressing

ok now i have ventured into new territory and am lost i have a customer with a 9 channel dvr at the office i need to know how to give him the abbility to view his cameras from home he has high speed...
Replies: 3
Views: 5,082
Posted By dclegg12

thanks mrron

thanks for the help is there a downloadable manual for this like the othe panels if so can you please post a link
Replies: 3
Views: 5,082
Posted By dclegg12

ademco am100

i have a customer who has an am100 panel and wants to make some changes in it he does not have the master or installer code so is there a way around it and does anyone have an online manual for it
Replies: 8
Views: 5,106
Posted By dclegg12

i have not ever used something with a four or...

i have not ever used something with a four or five pair connecting block other you might find a screw down terminal strip that might do what you need post back and let me know what you do so we will...
Replies: 5
Views: 2,912
Posted By dclegg12

room in the nid??

if you only have three cables in the nid you have plenty of room to put a number of cables all you need to do is strip the sheath back and only put the two leads in the grommet you are going to use...
Replies: 3
Views: 1,290
Posted By dclegg12

Question Camera questions

Ok i know everyone here gets tired of me asking questions but this is what i need this time i have a customer that is wanting one camera at 6 different stores and be able to view them in real time at...
Replies: 6
Views: 1,076
Posted By dclegg12

thanks for all the help i am going to try to get...

thanks for all the help i am going to try to get thru this i have already changed over one of there accounts and just pulled another wire but just to know how do you wire a zone into a keypad. on...
Replies: 6
Views: 1,076
Posted By dclegg12

i have looked thru all the documents i have on...

i have looked thru all the documents i have on pc1555 but i cannot find the commands for that you say i need to assign a keypad a zone and that is it but if anyone can tell me teh exact keystrokes to...
Replies: 6
Views: 1,076
Posted By dclegg12

Angry once again a question on the pc1555

i know you get tired of hearing from me but this is what i have a pc1555 that zone one is wired into the keypad and on the panel zone one is jumped out with a resistor it works fine now but i need to...
Replies: 5
Views: 1,339
Posted By dclegg12

another problem

thanks bryan for all your help everything is fine now but i have one more question on the pc1555 whomever installed it first has run the first zone off of the keypad explain this to me and please go...
Replies: 5
Views: 1,339
Posted By dclegg12

well that is where i started from was from...

well that is where i started from was from defaulting the box by shorting out the z1 and p1 but i dont think i changed anything to make it not dial out any other suggestions and i know it was working...
Replies: 3
Views: 32,387
Posted By dclegg12

well all i can make of the post is you need to...

well all i can make of the post is you need to put your multi meter on dc voltage to test telephone voltage 96 volts ringing current
Replies: 11
Views: 28,925
Posted By dclegg12

yeah just start with the last thing you did i...

yeah just start with the last thing you did i would also unplug the phone from all receivers and see what happens
Replies: 5
Views: 1,339
Posted By dclegg12

pc1555 not dialing

i am re-programming a pc1555 but i cannot get it to dial out i am sure there is just one step i am overlooking but man i cannot seem to figure it out i am used to the networkx panels and they seem to...
Showing results 1 to 25 of 29
 


 
Forum Jump