Search: Posts Made By: ewizard
Showing results 1 to 7 of 7
Search took 0.00 seconds.
Replies: 15
Views: 3,662
Posted By ewizard

The chain guides are plastic, plastic has no...

The chain guides are plastic, plastic has no business inside of an engine.
The driver side guide is straight because the rotation tension is for the crank to pull the cam by that side and mine had...
Replies: 15
Views: 3,662
Posted By ewizard

Bob, That works. The chain and gear marks line...

Bob, That works. The chain and gear marks line up. One on the single mark, the other in between the two marks. I was thinking there would be a roller between the two. I have to get some gasket...
Replies: 15
Views: 3,662
Posted By ewizard

Bob, Thanks, that helps. With the crank mark at...

Bob, Thanks, that helps.
With the crank mark at 6:00 #1 & #4 are at tdc while #2 & #4 are at bdc.
The single paint mark aligned at the crank mark will put the cam mark aligned at the double chain...
Replies: 15
Views: 3,662
Posted By ewizard

Marbobj, The new chain has the same three marks...

Marbobj, The new chain has the same three marks you mentioned.
Two adjoining links at one end and one at the exact opposite end.
The chain has an odd number of links because the single marked link...
Replies: 15
Views: 3,662
Posted By ewizard

Marbobj, The new timing set's chain has paint...

Marbobj, The new timing set's chain has paint marks on one side at opposite ends of the chain.
I would think that this has an important place in the alignment procedure, yet neither the timing set...
Replies: 15
Views: 3,662
Posted By ewizard

I also noticed the chain guide driver side...

I also noticed the chain guide driver side missing and grooves in the timing cover and head.
I bought a new timing set (with guides and tensioner) and assume the installation is typical (alignment...
Replies: 15
Views: 3,662
Posted By ewizard

84 Toyota Celica water in oil

I am working on fixing this problem when I talked to a guy that
has the same problem in a truck who has replaced the head twice.
This has me thinking it is not a blown head gasket and since I had...
Showing results 1 to 7 of 7


 
Forum Jump