Search: Posts Made By: pugsl
Showing results 1 to 8 of 8
Search took 0.00 seconds.
Replies: 32
Views: 4,820
Posted By pugsl

Depends on how much you want to spend. Dryer all...

Depends on how much you want to spend. Dryer all work about the same, Some have more features.
Replies: 32
Views: 4,820
Posted By pugsl

Thanks PJMax can read it now. Don't think it will...

Thanks PJMax can read it now. Don't think it will help much, D1 to D3 or D4 depending on button push should have continuity. (closed ), More switches than any dryer I have ever worked on.
KENMORE...
Replies: 32
Views: 4,820
Posted By pugsl

In many years of working on dryers have never...

In many years of working on dryers have never seen 2 door switches, Sometimes on back of switch will be diagram to connections. PJ probably has it right but have seen them setup different. When you...
Replies: 32
Views: 4,820
Posted By pugsl

Reread your original post, where was the buzzing...

Reread your original post, where was the buzzing sound coming from? bottom near motor or someplace else. Usually buzzing or groan when you push start button is motor. Do you have a ohm meter to check...
Replies: 32
Views: 4,820
Posted By pugsl

Open door and work switch. Does it click? Is...

Open door and work switch. Does it click? Is there a light in dryer and does it work? With switch should go on and off. Run side of switch could still be bad, but dryer would of not made groaning...
Replies: 32
Views: 4,820
Posted By pugsl

It os such a common problem that I always include...

It os such a common problem that I always include a blower wheel in price, Always can take it off if not needed but hard to tell customer it's going to cost more.
Replies: 32
Views: 4,820
Posted By pugsl

You have a fairly easy motor to replace. To get...

You have a fairly easy motor to replace. To get blower wheel off use a 1/2 inch extension with a ratchet or breaker bar in front. 7/8 inch open end wrench on back and loosen to the right. Opposite of...
Replies: 32
Views: 4,820
Posted By pugsl

You need a motor, Not to hard to replace.

You need a motor, Not to hard to replace.
Showing results 1 to 8 of 8


 
Forum Jump