Search: Posts Made By: cheese
Showing results 1 to 10 of 10
Search took 0.00 seconds.
Replies: 32
Views: 2,626
Posted By cheese

The bowl may be distorted so that it's not...

The bowl may be distorted so that it's not pressing against the gasket or is letting air out past the gasket. Sometimes the bowl gets put on crooked and when the nut is tightened, it pushes the...
Replies: 32
Views: 2,626
Posted By cheese

If it won't prime, the gasket between the air...

If it won't prime, the gasket between the air filter housing and the carb is not sealing, and/or the bowl gasket is not sealing. You primer does have a hole in it, right?
Replies: 32
Views: 2,626
Posted By cheese

Is it sparking? _____________

Is it sparking?
_____________
Replies: 32
Views: 2,626
Posted By cheese

Yep, it should. _________

Yep, it should.
_________
Replies: 32
Views: 2,626
Posted By cheese

There should be a hole lining up with the hole in...

There should be a hole lining up with the hole in the end of the slot in the air filter box. If not, you have the wrong gasket or it's installed wrong. Even when it's right, you won't feel the...
Replies: 32
Views: 2,626
Posted By cheese

Bend that flat piece of metal away enough so that...

Bend that flat piece of metal away enough so that you can see in the throat of the carb and hit the primer a few times while you're watching in the throat and see if it's bubbling some gas in there...
Replies: 32
Views: 2,626
Posted By cheese

Your trimmer, blower, etc.. works the way you...

Your trimmer, blower, etc.. works the way you described, but this does not. It just pumps a little air into the carb bowl, which forces fuel out the little pipe in the middle of the carb. Is this...
Replies: 32
Views: 2,626
Posted By cheese

The primer isn't sucking anything, it pumps a...

The primer isn't sucking anything, it pumps a little air into the carb. You won't feel it doing anything. Look in the throat of the carb and see if you see a little gas bubble up from the tube in...
Replies: 32
Views: 2,626
Posted By cheese

i doubt that you'll need a kit, just clean what's...

i doubt that you'll need a kit, just clean what's there and put back together.
Replies: 32
Views: 2,626
Posted By cheese

Take the bolt out that holds the bowl on the...

Take the bolt out that holds the bowl on the carburetor and clean it well. There are tiny holes in that bolt that are probably plugged.
Showing results 1 to 10 of 10


 
Forum Jump