Search: Posts Made By: cheese
Showing results 1 to 6 of 6
Search took 0.00 seconds.
Replies: 25
Views: 83,302
Posted By cheese

The needle doesn't seat on a brass seat on this. ...

The needle doesn't seat on a brass seat on this. If yours does, it has a different carburetor. The seat is white plastic on the carburetor in this topic. If you have a brass seat, there is no...
Replies: 25
Views: 83,302
Posted By cheese

Good, glad we could help. That o-ring must have...

Good, glad we could help. That o-ring must have fallen out while you weren't lookin'!
Replies: 25
Views: 83,302
Posted By cheese

Look in the hole in the carb where the piece...

Look in the hole in the carb where the piece sticks up into the bottom of the carb, it may be stuck there.
Replies: 25
Views: 83,302
Posted By cheese

The needle and seat rarely give trouble on this...

The needle and seat rarely give trouble on this carb (the seat is plastic anyway). The o-ring is the usual culprit. If the needle is giving trouble, it's usually because a piece of debris is stuck...
Replies: 25
Views: 83,302
Posted By cheese

The plug wire can still arc without the plug in...

The plug wire can still arc without the plug in it. Don't want to light the gas that may blow out the plug hole.

The jet goes way down the inside of the long tube. If the o-ring is twisted...
Replies: 25
Views: 83,302
Posted By cheese

The piece you saw fall out is the main jet. It...

The piece you saw fall out is the main jet. It goes down in the center of the white plastic insert. Small side in first.

Look at the white plastic insert on the opposite side of where the...
Showing results 1 to 6 of 6


 
Forum Jump