Search: Posts Made By: aj-allen
Showing results 1 to 25 of 200
Search took 0.03 seconds.
Replies: 5
Views: 234
Posted By aj-allen

there are some numbers stamped into the carb if...

there are some numbers stamped into the carb if you post them we can translate them to the carb part number and the bowl nut number
Replies: 6
Views: 364
Posted By aj-allen

The murray part numbers for the auger belt is...

The murray part numbers for the auger belt is 313847MA and the drive belt is 313851MA
Replies: 4
Views: 255
Posted By aj-allen

Original carb part number 631459 Supersedes to...

Original carb part number 631459 Supersedes to 631793 service carb
Replies: 6
Views: 364
Posted By aj-allen

The manufacturer of record for your snow thrower...

The manufacturer of record for your snow thrower was General Power. However General Power never made any of the snow throwers but contracted with NOMA to make their snow throwers. Unfortunately...
Replies: 5
Views: 261
Posted By aj-allen

I looked through several models that use that...

I looked through several models that use that axle (old part number) until I found the part number
Replies: 5
Views: 261
Posted By aj-allen

The bushing part number should be 532406013

The bushing part number should be 532406013
Replies: 15
Views: 456
Posted By aj-allen

OEM or aftermarket carb where did you get it from?

OEM or aftermarket carb where did you get it from?
Replies: 12
Views: 714
Posted By aj-allen

Your carb part number is 632107 carb kit 31840 ...

Your carb part number is 632107 carb kit 31840

AJ
Replies: 4
Views: 439
Posted By aj-allen

The bearing number is 941-0185 and the bearing...

The bearing number is 941-0185 and the bearing housing is 05244B qty 2

AJ
Replies: 6
Views: 2,977
Posted By aj-allen

Hub assy should be part number 1739282YP ...

Hub assy should be part number 1739282YP
Friction Disc part number 1501435MA
Replies: 7
Views: 525
Posted By aj-allen

It may be that the weld on the lever that lifts...

It may be that the weld on the lever that lifts the friction wheel into the friction disc is broken
Replies: 16
Views: 807
Posted By aj-allen

To correctly set the timing on a Tecumseh...

To correctly set the timing on a Tecumseh adjustable points ignition you must set the stator to break open at the correct distance BTDC:

https://imgur.com/WHOwh1Y

The correct setting for your...
Replies: 3
Views: 365
Posted By aj-allen

Do you have the plastic key in the little...

Do you have the plastic key in the little rectangle hole?
Replies: 4
Views: 678
Posted By aj-allen

The part number for the auger belt is 313847MA

The part number for the auger belt is 313847MA
Replies: 5
Views: 508
Posted By aj-allen

To correctly set the timing on a Tecumseh...

To correctly set the timing on a Tecumseh adjustable points ignition you must set the stator to break open at the correct distance BTDC:

https://imgur.com/WHOwh1Y
Replies: 6
Views: 2,977
Posted By aj-allen

The company that provided parts & service for...

The company that provided parts & service for your snow thrower was General Power however they never made any of the snow throwers. They contracted with NOMA for the snow throwers. Sadly they had...
Replies: 11
Views: 2,736
Posted By aj-allen

Sixty-two years of experience.

Sixty-two years of experience.
Replies: 11
Views: 2,736
Posted By aj-allen

Your model is 2580-0100 Murray st Parts...

Your model is 2580-0100
Murray st Parts Diagram Index for 2580-0100 (http://www.partsandservice.com/html/Murray/st/st2580-0100.html)
Replies: 6
Views: 566
Posted By aj-allen

Most of the Karcher electric hoses only fit...

Most of the Karcher electric hoses only fit Karchers
Replies: 7
Views: 1,572
Posted By aj-allen

Yes you need a grade 8 bolt for this application....

Yes you need a grade 8 bolt for this application. It would be best it it were long enough so that there were no threads in the gear. you need a lock nut and do not tighten it the bolt must spin...
Replies: 8
Views: 788
Posted By aj-allen

This is the best way to remove the fitting: ...

This is the best way to remove the fitting:

82510
Replies: 4
Views: 649
Posted By aj-allen

There is suppose to be a square nut in the slot...

There is suppose to be a square nut in the slot below the handle.
Part number 712-04222 nut square 1/4-20
Replies: 4
Views: 661
Posted By aj-allen

WOW! I don't know where to begin with this an...

WOW! I don't know where to begin with this an occasional tank of 2 stroke in a 4 stroke shouldn't hurt anything. But I would never use it all the time!! Least of all in a Honda! Using 2 stroke in a 4...
Replies: 22
Views: 854
Posted By aj-allen

I don't know if they will leave this post up or...

I don't know if they will leave this post up or not but this is one of the best trimmer head you will ever use!!

https://www.oregonproducts.com/pro/products/oep/gator_speed_load.htm
Replies: 3
Views: 566
Posted By aj-allen

It would be much easier to purchase a new grease...

It would be much easier to purchase a new grease gun I have 6 for the various grease that I need in the shop.
Showing results 1 to 25 of 200
 


 
Forum Jump