Search: Posts Made By: bletzinger
Showing results 1 to 25 of 56
Search took 0.01 seconds.
Replies: 1
Views: 635
Posted By bletzinger

GE microwave/convection oven (JVM190K04) cooking light doesnt work

Replaced both bulbs (night and normal - both). No power to the bulb sockets although the electronic control panel makes the usual click for off/on/night.

I dropped the bottom of the unit and...
Replies: 9
Views: 2,535
Posted By bletzinger

Any danger in hotwiring the 2 blue wires until...

Any danger in hotwiring the 2 blue wires until 3392519 arrives (expedited)? I'll of course make sure the exhaust is free of lint and unobstructed.
Replies: 9
Views: 2,535
Posted By bletzinger

Dude Fairbanks46 - not sure how you knew but you...

Dude Fairbanks46 - not sure how you knew but you are 100% correct. I tried continuity on both original parts in # 279816 and both checked continuous (not the problem) and that's after purchasing #...
Replies: 9
Views: 2,535
Posted By bletzinger

Got a reading of 240 volts on the outside...

Got a reading of 240 volts on the outside terminals and 120 V outside terminals to middle (ground) which seems ok.
Replies: 9
Views: 2,535
Posted By bletzinger

Whirlpool electric dryer model # WED5840SW0 won't start

Dryer started this morning but came home this afternoon and it was off and now it wont start. I can hear the timer running though when it is "on" (but not operating)

I checked the start button and...
Replies: 12
Views: 5,447
Posted By bletzinger

epilogue: so the replacement hydrostatic drive...

epilogue: so the replacement hydrostatic drive #319-650 sprung a pretty good leak this week (2 years after replacement). I took indypower1 and Inspector 232's advice and bought a 2009 (162 hours)...
11-04-11, 05:55 AM
Replies: 11
Views: 832
Posted By bletzinger

So that's what the issue was - although there...

So that's what the issue was - although there were several continuations in that socket, not all were originally hooked up to the load side of the GFIC because they spanned 2 circuit breakers and...
Replies: 1
Views: 1,316
Posted By bletzinger

hoover u6317-930 loud pop and it no longer has suction - repairable?

I was vacuuming (Hoover power drive u6317-930) with the hose and there was a load pop (maybe it ingested a plastic item). The vacuum still runs, but the engine runs faster and there is absolutely no...
09-18-11, 04:20 PM
Replies: 11
Views: 832
Posted By bletzinger

Sorry one more potential clue: When the...

Sorry one more potential clue:

When the hallway light is hooked up and I turn the switch on, the GFIC trips, and the light either just blinks on then off or never comes on.

If the hall light is...
09-18-11, 04:03 PM
Replies: 11
Views: 832
Posted By bletzinger

another couple of hours checking continuity of...

another couple of hours checking continuity of neutrals between c1 and c2 and found both the 1/2 bath outlet source neutral (on the GFIC, c1) and the GFIC outlet source neutral in the master bath...
09-18-11, 12:40 PM
Replies: 11
Views: 832
Posted By bletzinger

There is a bundle of neutrals capped in the...

There is a bundle of neutrals capped in the hallway light switchbox. Is this what you mean by pigtailed? I could check continuity from c1 to c2 on these? I assume I need to disconnect the c1 neutral...
09-18-11, 12:11 PM
Replies: 11
Views: 832
Posted By bletzinger

11 outlets, the hallway light fixture and 2...

11 outlets, the hallway light fixture and 2 ceiling fans are on circuit 2.

Given shared ground and neutral between circuit 1 & circuit 2, I'm still puzzled by the fact that only the hallway light...
09-18-11, 11:51 AM
Replies: 11
Views: 832
Posted By bletzinger

Ok, I switched off circuit 1 & 2 breakers,...

Ok, I switched off circuit 1 & 2 breakers, plugged an extension cord into the c1 GFIC outlet to reach c2 hallway source and confirmed BOTH ground and neutral are shared.

So do I start...
09-18-11, 11:21 AM
Replies: 11
Views: 832
Posted By bletzinger

the switch box for the circuit 2 hallway light...

the switch box for the circuit 2 hallway light has multiple bare wires bundled in a line. Maybe its a wrong assumption, but that would be the only way I can think of to get from circuit 2 to 1 to...
09-18-11, 11:10 AM
Replies: 11
Views: 832
Posted By bletzinger

perplexing GFCI problem

I have spent hours trying to troubleshoot this one but the solution escapes me.

I have 2 circuits (on 2 seperate breaker switches), circuit 1 with a GFCI in a bathroom (with conitinuations) and...
Replies: 1
Views: 2,811
Posted By bletzinger

temperature probe for GE microwave convection oven - fix or replace?

I have a GE convection microwave oven model # jvm190k 004. the temperature probe (# AP2023186) is loose at the spear end on both sides of the plastic/rubber part. It works intermittently if I twist...
Replies: 2
Views: 4,501
Posted By bletzinger

update: replaced spark plug it tilled a row...

update:

replaced spark plug it tilled a row then the tines stopped again. It's running pretty hot - I think.

I think I found the problem and it doesnt look good - I changed the oil and it...
Replies: 2
Views: 4,501
Posted By bletzinger

Craftsman 5 HP front tine tiller 917.295350

Decided to work on my tiller on a very nice columbus day.

It starts immendiately (first pull today) and it runs well but after about a minute of tilling it stops rotating the tines. I checked the...
Replies: 12
Views: 5,447
Posted By bletzinger

Neighbor installed the used transmission and I...

Neighbor installed the used transmission and I helped some. Seems to work ok except it doesnt free wheel when I pull the lever in the rear (to move it while it's not running). But for $50, Im happy...
Replies: 12
Views: 5,447
Posted By bletzinger

thanks Glen - I'll get some 20w-50 and give that...

thanks Glen - I'll get some 20w-50 and give that a try
Replies: 12
Views: 5,447
Posted By bletzinger

Looks like the exploded parts view for the...

Looks like the exploded parts view for the hydrogear 319-0650 transmission lists 20W50 as the replacement fluid.

http://ipl.ordertree.com/ipl/147/319-0650_150071.pdf

I'll check with the...
Replies: 12
Views: 5,447
Posted By bletzinger

option 5: neighbor has a spare hydrostatic drive...

option 5: neighbor has a spare hydrostatic drive #319-650 laying around and wants $50 and my help to install which is great if it works. Seems easier than replacing the shaft. Anyone have any tips on...
Replies: 12
Views: 5,447
Posted By bletzinger

Thanks for the reply indypower. I was hoping the...

Thanks for the reply indypower. I was hoping the shaft was easier to replace than it looks to be (opening up the transmission). I doubt its something I can handle and/or invest the time in.

My...
Showing results 1 to 25 of 56
 


 
Forum Jump