Search: Posts Made By: liljman
Showing results 1 to 25 of 102
Search took 0.02 seconds.
Replies: 2
Views: 1,492
Posted By liljman

Preforming a compression test on each cylinder...

Preforming a compression test on each cylinder should confirm your suspicions...

Good luck and have a great day
Replies: 10
Views: 1,262
Posted By liljman

Highly recommend take it to a qualified shop and...

Highly recommend take it to a qualified shop and have them check the abs system

Good luck and have a great day
Replies: 3
Views: 3,623
Posted By liljman

| Repair Guides | Front Suspension | Upper Ball...

| Repair Guides | Front Suspension | Upper Ball Joints | AutoZone.com (http://www.autozone.com/autozone/repairinfo/repairguide/repairGuideContent.jsp?pageId=0996b43f8025ee97)

good luck and have a...
Replies: 2
Views: 1,205
Posted By liljman

look under the truck and you should find a cable...

look under the truck and you should find a cable comming from each rear hub to a Y connector which then runs to the piece that you replaced. thare should be some adjustment at the Y connector..
...
Replies: 1
Views: 774
Posted By liljman

replace the thermocoupler Good luck and have...

replace the thermocoupler

Good luck and have a great day
Replies: 3
Views: 1,212
Posted By liljman

seems as though if the regulator that came with...

seems as though if the regulator that came with the camper handled the load, there is no reason to think that a new one with the same pressure etc. would'nt do the job as well...

Good luck and...
Replies: 2
Views: 2,534
Posted By liljman

Here is the best step by step i could find hope...

Here is the best step by step i could find hope it helps

Remove the five mounting screws from the instrument cluster trim plate and detach the trim plate.

Remove the four mounting screws from...
Replies: 2
Views: 2,534
Posted By liljman

I have pictures showing what I think is what you...

I have pictures showing what I think is what you need to see however I don't know how to upload them.
If you would like to contac me thru e-mail i would be glad to forward them to you

Good luck...
Replies: 2
Views: 1,814
Posted By liljman

may we assume you are using the proper type of...

may we assume you are using the proper type of brake fluid??

Good luck and have a great day
Replies: 2
Views: 1,013
Posted By liljman

If you are trying to use the a/c option then the...

If you are trying to use the a/c option then the battery is no-longer part of the equation.
after having the unit plugged into an a/c outlet for an hour or so, try and feel if the cooling unit on...
Replies: 7
Views: 37,175
Posted By liljman

Drain the tank, let it dry seal the crack with a...

Drain the tank, let it dry seal the crack with a silicone sealer, let it cure properly .
That should do it..

Good luck and have a great day
Replies: 5
Views: 1,392
Posted By liljman

[QUOTE=Marni94;1742325]Any helpful hints on how...

[QUOTE=Marni94;1742325]Any helpful hints on how to recharge with freon on my own? Is it readily available at Pep Boys or Napa or someplace?
]

Yes very easy to do, you can purchase the freon at...
Replies: 5
Views: 1,392
Posted By liljman

I have a coupon from a local shop for a flush and...

I have a coupon from a local shop for a flush and recharge for $70. Do you think a recharge is all it needs or are there many things it could be? Any way for me to determine on my own?
I would...
Replies: 4
Views: 3,703
Posted By liljman

The air conditioner: Based on your info, the...

The air conditioner:
Based on your info, the freon IS low, the pressure switch USUALLY won't engage the compressor until there is 50lbs. pressure.
Connect a can of 134A to the suction line, use...
Replies: 4
Views: 3,703
Posted By liljman

I checked the codes and it shows code 25 which is...

I checked the codes and it shows code 25 which is the idle air control valve.

Was the code tc25 A, B, C, D or E ?

(Direct battery input to PCM was disconnected within the last 50 key-on...
06-01-10, 05:11 AM
Replies: 2
Views: 1,687
Posted By liljman

looks like a dirt dauber's nest to me ...

looks like a dirt dauber's nest to me

Good luck and have a great day
Replies: 4
Views: 719
Posted By liljman

open windows explorer, c:\ program files, find...

open windows explorer, c:\ program files, find the perticular program file that you want to uninstall, open it and most times there will be an uninstall app.

Good...
Replies: 3
Views: 845
Posted By liljman

try shutting it off for several hours then...

try shutting it off for several hours then restart, have you tried running on gas to see if it gets any colder?

good luck and have a great day
Replies: 1
Views: 2,654
Posted By liljman

Not sure about prob. #1, However I had the same...

Not sure about prob. #1, However I had the same issue as you with the volume control, Mine would do the same as yours but if i put a little pressure on the button it would become loud again. I...
Replies: 3
Views: 951
Posted By liljman

Before analyzing cpu temps and fan rpms, May I...

Before analyzing cpu temps and fan rpms, May I recommend opening up the computer and with a can of "cleaning air" and a very gentle brush, give the inside a thorough yet gentle cleaning, IE, any...
03-28-10, 06:28 AM
Replies: 11
Views: 1,145
Posted By liljman

One thing is for sure, We can't help if you don't...

One thing is for sure, We can't help if you don't ask. lol

Good luck and have a great day
Replies: 7
Views: 10,277
Posted By liljman

Don't let off the pedal til the bleeder is...

Don't let off the pedal til the bleeder is completely closed,
check all the line connections ,be sure they are tight.

Good luck and have a great day
Replies: 4
Views: 1,079
Posted By liljman

Assuming that the oil level was correct at the...

Assuming that the oil level was correct at the time you lost pressure, I would advise finding out, 1. what caused the pressure loss, 2. where did the oil go?
Judging by the intermittent "low coolant...
Replies: 7
Views: 849
Posted By liljman

9 to 13 psi. Good luck and have a great day

9 to 13 psi.

Good luck and have a great day
Replies: 1
Views: 4,716
Posted By liljman

Forward control footpegs/controls don't mount the...

Forward control footpegs/controls don't mount the same as stock pegs.
First things you will need are a set of stock footpegs AND stock brake and shifter.
Once these are acquired the rest is pretty...
Showing results 1 to 25 of 102
 


 
Forum Jump