Search: Posts Made By: PondScum
Showing results 1 to 25 of 78
Search took 0.01 seconds.
Replies: 4
Views: 392
Posted By PondScum

I believe 10.22 added a keypad lockout feature...

I believe 10.22 added a keypad lockout feature about about five or so incorrect code entries. I don't know what 10.23 added. 9.12 or higher is needed for TC 2 compatibility. If you have access to...
Replies: 7
Views: 292
Posted By PondScum

Carrier charges are most often handled by the...

Carrier charges are most often handled by the platform provider - alarm.com, Honeywell/Resideo for AlarmNet, Alula, etc and it's included in your monthly charges. You don't need to worry about it,...
Replies: 2
Views: 210
Posted By PondScum

It won't work, both communicators want to be at...

It won't work, both communicators want to be at address 3 and only one device can be at a given address. There's nothing to be gained by having your old communicator connected if it were possible...
Replies: 2
Views: 374
Posted By PondScum

Clearing wireless sensor low battery notice on TotalConnect

Several months ago I got a notice of a low battery in a motion detector on my Honeywell Vista 20p. The same notice showed up in the TotalConnect app. I pulled power, including the battery from the...
Replies: 7
Views: 465
Posted By PondScum

If your IQ 2 panel is compatible with either...

If your IQ 2 panel is compatible with either Interlogix 319.5MHz wireless sensors, or Honeywell/2GIG 345MHz wireless sensors, you can use an Encore FireFighter smoke alarm listener to listen to your...
Replies: 10
Views: 459
Posted By PondScum

I don't worry about this in either of our homes. ...

I don't worry about this in either of our homes. Because the way they're laid out, keys are kept far from an entry point. And good luck ever finding anything in my wife's purse. However, you bring...
Replies: 10
Views: 459
Posted By PondScum

I disarm with a key fob while I'm still in the...

I disarm with a key fob while I'm still in the driveway, before I open the garage door.

Who wants to race into the house to disarm the alarm at a keypad?

I mounted the LED from a CE3 into the...
Replies: 8
Views: 1,128
Posted By PondScum

I’ve swapped a 6150RF for a 6160RF in order to...

I’ve swapped a 6150RF for a 6160RF in order to get more wireless zones. I can confirm previous posts stating that the programming is in the panel and not in the keypad.
Replies: 7
Views: 458
Posted By PondScum

You can buy a used Lynx Plus on EBay for $20.

You can buy a used Lynx Plus on EBay for $20.
Replies: 3
Views: 306
Posted By PondScum

Sounds like the contact is programmed into the...

Sounds like the contact is programmed into the system as an NO (normally open), and your old contact probably had both a set of NO and NC terminals, and the wires were hooked up to the NO terminals. ...
Replies: 4
Views: 647
Posted By PondScum

ADT Smartthings hub is supposedly some customized...

ADT Smartthings hub is supposedly some customized platform built by 2GIG and stuffed into a 2GIG GC3 case. I imagine the alarm sensors (standard 345MHz wireless alarm sensors) are added to the...
Replies: 11
Views: 3,696
Posted By PondScum

They have an annoying shill who spams some of the...

They have an annoying shill who spams some of the subreddits where alarm systems are discussed. The shill doesn't even know which systems their device supports - he spams threads for wireless AIO...
Replies: 7
Views: 1,204
Posted By PondScum

Pretty sure that's what I yanked out of my...

Pretty sure that's what I yanked out of my mother's house.

https://i.imgur.com/y7oNu5z.jpg

Ok, that was a 4150. Replaced it with a Vista 20p and three keypads, a 6160V, a 6160, and a 6150RF....
Replies: 9
Views: 1,627
Posted By PondScum

>OP wouldn't even need to program the panel: Any...

>OP wouldn't even need to program the panel: Any defaulted Honeywell Vista panel comes with Zone 1 programmed to serve as a 4-wire fire zone. If he just straps out other zones with jumper wires or
...
Replies: 9
Views: 850
Posted By PondScum

Use Powerline adapters. That's what I've always...

Use Powerline adapters. That's what I've always used to get a network connection to my alarm communicator.
Replies: 9
Views: 850
Posted By PondScum

For #2, you should go with cellular or dual-path....

For #2, you should go with cellular or dual-path. I have dual-path with a Honeywell iGSMV4G, and use Powerline networking to get my communicator connected to the internet. Relying on Internet only...
Replies: 10
Views: 1,225
Posted By PondScum

POTS monitoring should only cost $8 a month.

POTS monitoring should only cost $8 a month.
Replies: 10
Views: 575
Posted By PondScum

Connect the PGM output to an SPDT relay to use it...

Connect the PGM output to an SPDT relay to use it with your Z-wave contact (contact wired to NC and COM terminals on relay), or use a Z-wave trigger and replace your Z-wave contact.
Replies: 6
Views: 594
Posted By PondScum

The keypads are addressable, and need to have...

The keypads are addressable, and need to have unique addresses. There is a button sequence at power-on to set the address of the keypad. You need to make the new keypad's address match the address...
Replies: 7
Views: 946
Posted By PondScum

I think ADT calls it a “Pulse TS” system.

I think ADT calls it a “Pulse TS” system.
Replies: 11
Views: 586
Posted By PondScum

My Ring doorbell was getting around -48 w/o a...

My Ring doorbell was getting around -48 w/o a range extender, and now gets -33 with a range extender (Netgear EX6400). Netgear R7000 router is at the other end of the house, on the second story. ...
Replies: 8
Views: 804
Posted By PondScum

Just curious - are these changes implemented via...

Just curious - are these changes implemented via custom firmware? Could you buy the 10.23 TC ROM for a Vista-20p, and turn your Monitronics Vista-20p panel into a generic VIsta-20p?

Since the...
Replies: 13
Views: 1,550
Posted By PondScum

That's not at all how I would choose a system. ...

That's not at all how I would choose a system. I'd be looking at what I needed the system to do and the available contacts, environmental sensors, keypads, key fobs, sirens, etc. that work with each...
Replies: 3
Views: 608
Posted By PondScum

My Arlo Pro base station and Netgear R7000...

My Arlo Pro base station and Netgear R7000 wireless router are located in the same room, at one end of my house, on the second floor. All of the Arlo cameras have a strong signal, even the ones...
11-02-18, 12:33 PM
Replies: 1
Views: 472
Posted By PondScum

Shower slider window - which panel should be operable?

I have a small horizontal slider in my master bath shower, on the wall that is the long direction of the shower. The window is near the top of the shower - the bottom of the window opening is above...
Showing results 1 to 25 of 78
 


 
Forum Jump