Search: Posts Made By: Geochurchi
Showing results 1 to 25 of 83
Search took 0.11 seconds.
01-20-21, 08:10 AM
Replies: 6
Views: 160
Posted By Geochurchi

Hi, how is the * connected at the furnace, is...

Hi, how is the * connected at the furnace, is there a wiring Dia you could post, the sub base that Pete referred to is the plate on the wall.
Geo🇺🇸
01-16-21, 09:50 AM
Replies: 3
Views: 128
Posted By Geochurchi

Hi, shut the power off to that circuit, at the...

Hi, shut the power off to that circuit, at the breaker, pull that receptacle out of the wall and check the connections, if you find the wires are pushed into the back of the receptacle remove them...
01-15-21, 05:26 AM
Replies: 6
Views: 191
Posted By Geochurchi

Hi, I would say the location is the least of your...

Hi, I would say the location is the least of your worries, first off, thatís an FPE panel, I doubt you will find new breakers, and if you do there is no space for additional breakers ,it sure appears...
12-23-20, 06:33 AM
Replies: 4
Views: 255
Posted By Geochurchi

Hi, I donít like the idea of a panel in a crawl...

Hi, I donít like the idea of a panel in a crawl space, probably best to get the 6/3 into the existing panel, this conduit runs from the main panel to the new shop, correct? what size is the conduit?...
12-22-20, 11:43 AM
Replies: 2
Views: 103
Posted By Geochurchi

Hi, sure sounds like a hidden GFCI, check in...

Hi, sure sounds like a hidden GFCI, check in bathrooms , kitchen, unplug everything on the circuit that is out and see if the breaker will reset.
Geo🇺🇸
12-22-20, 11:38 AM
Replies: 8
Views: 259
Posted By Geochurchi

Hi, sounds like something heís making up, did he...

Hi, sounds like something heís making up, did he state you the code rule? The AHJ all have their own little quirks.
Geo 🇺🇸
Replies: 10
Views: 293
Posted By Geochurchi

Hi, as stated, that is not a fan rated box,...

Hi, as stated, that is not a fan rated box, instead itís a bar box with a plaster ring, should be removed and a proper box installed.
Geo🇺🇸
Replies: 6
Views: 189
Posted By Geochurchi

Hi, looks like you are stuck with that one WM has...

Hi, looks like you are stuck with that one WM has had lots of problems with that whole unit, even a class action law suit, maybe you should contact them.
Geo 🇺🇸
12-01-20, 09:46 AM
Replies: 10
Views: 258
Posted By Geochurchi

Hi, probably the guy at the big box store was a...

Hi, probably the guy at the big box store was a retired shoe salesman, as mentioned that breaker can not be used.
Now a different dryer turns on but it is giving a error code of PS, how many driers...
11-30-20, 05:55 AM
Replies: 9
Views: 259
Posted By Geochurchi

Well, it sounds like you ruined that cable, post...

Well, it sounds like you ruined that cable, post some pics of what you have there.
Geo 🇺🇸
Replies: 6
Views: 174
Posted By Geochurchi

Hi, is there a soffit outside, post a pic of what...

Hi, is there a soffit outside, post a pic of what the outside by the fan location.
Geo🇺🇸
Replies: 12
Views: 417
Posted By Geochurchi

Hi, the 2700 is the lamp color, the 2000 lumens...

Hi, the 2700 is the lamp color, the 2000 lumens is the brightness. 2700 being a warmer color, 3500 being a bit whiter and brighter 4000, 5000 etc., 2700 is probably a good choice for the kitchen...
11-03-20, 03:45 PM
Replies: 9
Views: 358
Posted By Geochurchi

Hi, if it takes a few minutes to trip the...

Hi, if it takes a few minutes to trip the breaker, itís a hi resistance ground and you may not see it with a meter, (Been there), pull the conductors out and install new, connect a pull line to the...
10-21-20, 06:56 AM
Replies: 6
Views: 296
Posted By Geochurchi

Hi, pull the board and check for any bad solder...

Hi, pull the board and check for any bad solder joints.
Geo🇺🇸
10-15-20, 07:13 AM
Replies: 16
Views: 628
Posted By Geochurchi

Hi, this may be an option, although it will move...

Hi, this may be an option, although it will move the lamp further down in the fixture.
https://www.homedepot.com/p/Defiant-Smart-Dusk-to-Dawn-Screw-In-Light-Control-White-SLC9BCD/300440744
Is that...
10-14-20, 01:04 PM
Replies: 16
Views: 628
Posted By Geochurchi

Hi, does the fixture have a threaded knock out?...

Hi, does the fixture have a threaded knock out? post a pic of the fixture, your wiring sounds correct.
Geo🇺🇸
10-06-20, 06:42 AM
Replies: 3
Views: 226
Posted By Geochurchi

Hi, looking at that pipe closer, it looks like it...

Hi, looking at that pipe closer, it looks like it was snapped off, which will require the cement to be chipped away and possibly installing a coupling first or removing the pipe back into the...
10-05-20, 02:02 PM
Replies: 3
Views: 226
Posted By Geochurchi

Hi, do you have the manual for the furnace? This...

Hi, do you have the manual for the furnace? This pic should give you an idea of what it should be like , hardware screen would be fine, fittings should be available at the Big Box stores, you will...
09-30-20, 10:22 AM
Replies: 10
Views: 456
Posted By Geochurchi

Hi, if you are planning on have 2 separate...

Hi, if you are planning on have 2 separate circuits, pull all that cable back into the basement, if you can’t find the other end of that cable just put in another box nailed onto a joist and label...
09-30-20, 05:33 AM
Replies: 10
Views: 456
Posted By Geochurchi

Hi, looks like a switchleg in that box, maybe...

Hi, looks like a switchleg in that box, maybe best to straighten those cables out and pull them out of the box , if there is a 14 /2 in that circuit it must be protected by a 15 amp breaker.
Nicks...
Replies: 11
Views: 377
Posted By Geochurchi

Hi, if the boiler fails to start test across P1 &...

Hi, if the boiler fails to start test across P1 & P 2, you should read 24 VAC if its open.

Geo🇺🇸
Replies: 3
Views: 181
Posted By Geochurchi

Hi, post some model#s and mfg. How many wires are...

Hi, post some model#s and mfg. How many wires are at the splice point?
Geo
09-06-20, 01:23 PM
Replies: 12
Views: 307
Posted By Geochurchi

Hi, it would appear that conduit has slid down to...

Hi, it would appear that conduit has slid down to top of that meter socket , unless that duct seal was slid up, I would try and slide that conduit up a bit and tighten or replace that clip so that it...
09-06-20, 07:50 AM
Replies: 12
Views: 307
Posted By Geochurchi

Hi, if SE is installed correctly there is nothing...

Hi, if SE is installed correctly there is nothing wrong with it, used a lot in NE., also seems like it would have been money well spent to have that mess cleaned up.
Geo🇺🇸
09-05-20, 10:52 AM
Replies: 5
Views: 201
Posted By Geochurchi

Hi, if known for sure that the shed is fed from...

Hi, if known for sure that the shed is fed from the patio outlet then replace that receptacle with a GFCI and feed the shed from the load side of that receptacle.
Geo
Showing results 1 to 25 of 83
 


 
Forum Jump