Search: Posts Made By: 2john02458
Showing results 1 to 25 of 122
Search took 0.02 seconds.
Replies: 13
Views: 299
Posted By mossman

Turned out real nice... ...

Turned out real nice...

https://cimg2.ibsrv.net/gimg/www.doityourselft.com-vbulletin/2000x1504/f4343b37_412e_4153_9e61_9615bd9469cc_71e77d7c6b77cc21b24278ee050e8dfe08a353a5.jpeg
01-24-21, 07:54 AM
Replies: 14
Views: 269
Posted By aka pedro

Your 24 tooth should be fine for that. You will...

Your 24 tooth should be fine for that. You will also want at least one feather board to hold the boards against the fence, and I often use one on the fence to hold the stock to the table as well....
Replies: 11
Views: 306
Posted By sgull

The shaft goes in there about 5 inches. I had to...

The shaft goes in there about 5 inches. I had to sand off some off around the wood on the shaft because of course the new handle shaft comes to a good extent oversized. I probably sanded it a...
Replies: 11
Views: 306
Posted By sgull

Update: fixed, with new handle, bolt & nut, and...

Update: fixed, with new handle, bolt & nut, and gorilla glue

https://i.postimg.cc/0QX3Fwq0/IMG01575.jpg
01-23-21, 10:09 AM
Replies: 5
Views: 119
Posted By PJmax

I don't think what was done was a modification. ...

I don't think what was done was a modification.
He just fully removed the manufacturer supplied knockout.
Many plastic boxes will allow two wires in a knockout.
01-22-21, 05:58 PM
Replies: 8
Views: 257
Posted By XSleeper

Moderators note: Correct. There is no need...

Moderators note:

Correct. There is no need to start 2 threads on the same topic. Especially with the same exact photos, It wastes server space. If caught in time, duplicate threads will be...
Replies: 3
Views: 103
Posted By XSleeper

You want a fine finish blade. Typically a 7 1/4"...

You want a fine finish blade. Typically a 7 1/4" x 60 tooth carbide. And it may still chip. Best chance for not chipping- if the piece is not installed, flip it upside down so the teeth are...
01-20-21, 03:31 PM
Replies: 13
Views: 511
Posted By Norm201

Then you have a problem. Possibly with the...

Then you have a problem. Possibly with the microwave or with the circuit. If your microwave is a plug in unit, can you unplug it and using a heavy duty extension cord plug into another circuit as a...
01-20-21, 03:15 PM
Replies: 14
Views: 247
Posted By MAD King

I have a GE panel with breakers. :thumbup:

I have a GE panel with breakers. :thumbup:
01-20-21, 01:49 PM
Replies: 5
Views: 118
Posted By Norm201

Use a switch shield....

Use a switch shield. https://i.ebayimg.com/images/i/252291719549-0-1/s-l1000.jpg
01-20-21, 01:24 PM
Replies: 5
Views: 118
Posted By ARicci6792

I see exactly what you mean. Wiring the switch up...

I see exactly what you mean. Wiring the switch up renders the 2nd switch useless basically. Which normally wouldn’t be a problem since I have the remote that can mount in its place, I just don’t know...
Replies: 9
Views: 413
Posted By janebench

done!

I went with the drill hole option and it worked great! Thank you for taking the time to offer options. left empty room at the top for bubbles to escape. Just used distilled water which I put in...
Replies: 40
Views: 997
Posted By marksr

An orbital sander will do the job, they're just...

An orbital sander will do the job, they're just kind of slow. The small rooms I've used an edger on I followed up that sanding with an orbital sander.
Replies: 40
Views: 997
Posted By marksr

I've rented edgers to sand small rooms before,...

I've rented edgers to sand small rooms before, sometimes that's easier than using a larger sander.
While a lattice board would work, IMO door stop would look nicer....
Replies: 17
Views: 413
Posted By CircuitBreaker

The color temperature (Kelvin) is not the only...

The color temperature (Kelvin) is not the only thing that affects lighting quality the other important one is called Color Rendering Index (CRI)

While an incandescent or halogen lamp has a perfect...
01-14-21, 12:55 PM
Replies: 11
Views: 477
Posted By finkdb

I contacted my county permitting department and...

I contacted my county permitting department and talked to an inspector. He said to cut the tread length so that it fits fully inside one of the dados and then slide it over into the other dado so...
Replies: 40
Views: 997
Posted By marksr

A tiny amount of dust doesn't usually hurt the...

A tiny amount of dust doesn't usually hurt the poly. It's always a good idea to sand between coats [and remove most of the dust] this both promotes better adhesion and eliminates or reduces any...
Replies: 6
Views: 112
Posted By PJmax

joed is correct. The second switch is called...

joed is correct.

The second switch is called a dead end 3w switch since there is only a 3 wire cable there.

There are a few smart switches.....actually smart dimmers..... that don't need a...
01-13-21, 04:16 PM
Replies: 8
Views: 344
Posted By spott

Maybe this sight will help. ...

Maybe this sight will help.

https://www.supplyhouse.com/Flame-Sensors-11140000
Replies: 6
Views: 112
Posted By joed

It changes nothing. There is no neutral at either...

It changes nothing. There is no neutral at either switch.
Replies: 40
Views: 997
Posted By Pilot Dane

Looks better than carpet! You just need to...

Looks better than carpet! You just need to decide how "new" you want it to look. Luckily the rustic look is popular now.
Replies: 40
Views: 997
Posted By Pilot Dane

Stacking is simply putting on more planks to...

Stacking is simply putting on more planks to achieve the thickness or look that you want. For example if you need to have your base molding protrude out 1 1/2"+ from the wall you can start with a 4...
01-07-21, 12:22 PM
Replies: 6
Views: 195
Posted By johnryan

I just wanted to follow up with the final result....

I just wanted to follow up with the final result. I used a pipe strap as mentioned by 2john02458. Thank you! Here are pics of the final product....
Replies: 13
Views: 360
Posted By zoesdad

@396 – Just remembered a rule of thumb for...

@396 –

Just remembered a rule of thumb for kitchen lighting that I came across when I was doing mine. If I remember correctly, if you have an eat in kitchen there should be enough light at the...
Replies: 13
Views: 360
Posted By Tolyn Ironhand

I'm also not a fan of sconces but I agree with...

I'm also not a fan of sconces but I agree with 2john02458. Just be sure to look at sconces before you wire them in. They can get quite pricey fast.
Showing results 1 to 25 of 122
 


 
Forum Jump