Search: Posts Made By: MR Engineer
Showing results 1 to 5 of 5
Search took 0.01 seconds.
Replies: 6
Views: 549
Posted By MR Engineer

I suspect they are using a bleaching compound...

I suspect they are using a bleaching compound that contains chlorine or hydrogen peroxide, both of which are not compatible with copper.
12-04-20, 04:13 PM
Replies: 11
Views: 390
Posted By MR Engineer

How are you checking for power? If it is with a...

How are you checking for power? If it is with a volt ohm meter and there is actually no power, then you very well have a bad transformer. I had one from Amazon that was indeed DOA. But if it shows...
12-04-20, 01:35 PM
Replies: 5
Views: 297
Posted By MR Engineer

Basement 2x2

First, calling the 2x2s or 2x4s “floor joists” is a stretch, and neither will prevent the floor from “warping” if they have to span any significant “low spots”. These would more properly be called...
Replies: 15
Views: 497
Posted By MR Engineer

Be Careful!

First, as others have said, this old wiring becomes very brittle with age, and will crack exposing bare wire and will leave you with a real mess. And that can be a real issue with one of the options...
12-04-20, 10:33 AM
Replies: 5
Views: 395
Posted By MR Engineer

Shallow Outlet Box.

I've used a shallow outlet box for some similar problems. They are 1.25 inches deep with straps to nail to a stud. I cut those off, screw the box to the bottom of the cabinet, connect the wires,...
Showing results 1 to 5 of 5


 
Forum Jump