Search: Posts Made By: bulova
Showing results 1 to 8 of 8
Search took 0.01 seconds.
01-22-21, 02:44 PM
Replies: 6
Views: 280
Posted By joed

Yes. All boxes need covers.

Yes. All boxes need covers.
01-21-21, 10:27 AM
Replies: 10
Views: 461
Posted By CircuitBreaker

Any 24VAC 40VA transformer will work but does...

Any 24VAC 40VA transformer will work
but does not sound like a transformer issue please show a picture of the part that needs to be "slapped" sounds more like a sticking relay or contactor
01-21-21, 08:48 AM
Replies: 7
Views: 253
Posted By Pilot Dane

Yes, you can get telescoping slides or you can...

Yes, you can get telescoping slides or you can simply have the bins not slide out as far. Another option is to do tip out garbage containers.
...
01-20-21, 01:54 PM
Replies: 5
Views: 408
Posted By beelzebob

If you have vernier calipers, measure across...

If you have vernier calipers, measure across opposite flats. If you have number drills (#1 drill =.228 inch), find one that just goes into the female socket. Both of these approaches should give you...
01-20-21, 10:50 AM
Replies: 15
Views: 849
Posted By 2john02458

Do the lights flicker continuously while the MW...

Do the lights flicker continuously while the MW is operating? Or just when it starts up and then again when the klystron tube (the thing that makes the microwaves) cycles on and off while cooking...
Replies: 8
Views: 420
Posted By doughess

Nice to read that mbarone is making progress. ...

Nice to read that mbarone is making progress.

mbarone should first determine existing boiler capacity on coldest days. For easy, accurate way to find it see DH posts on this link:
...
01-18-21, 10:10 PM
Replies: 10
Views: 375
Posted By XSleeper

There is supposed to be a brass compression ring...

There is supposed to be a brass compression ring on the outside of the plastic tube that tightens and seals the fitting as you tighten the nut. There is a brass insert that goes inside the pipe to...
Replies: 8
Views: 420
Posted By spott

As PJ said you cannot just cut into a return. If...

As PJ said you cannot just cut into a return. If you are going to put the basement on its own zone it must have its own supply and return that will go into the main boiler return. 20 FT. of baseboard...
Showing results 1 to 8 of 8


 
Forum Jump