Search: Posts Made By: Michael
Showing results 1 to 25 of 55
Search took 0.01 seconds.
Replies: 5
Views: 1,150
Posted By Michael

If I remember correctly the problem occurs with...

If I remember correctly the problem occurs with fuel oil with high amounts of aromatics (no clue).
Also did you check to see if the drip is comming from under the pump, when the screen is cleaned...
Replies: 5
Views: 1,150
Posted By Michael

If you are going to remove the jack and plug the...

If you are going to remove the jack and plug the port you must pin the air shutter open or remove it, if the boiler were to start with the shutter closed, instant soot and smoke will be the result....
Replies: 7
Views: 887
Posted By Michael

Sorry about this but: Section 79.21 says reject...

Sorry about this but:
Section 79.21 says reject if "any lense is missing, broken (piece missing) or has a crack that results in an opening or improperly fit so that light is being emitted. (ammended...
Replies: 8
Views: 1,003
Posted By Michael

All that work and extra $$ and how many miles do...

All that work and extra $$ and how many miles do you have on the vehicle? I had a 92 Bronco with a 5.8L bought new, that I used Mobil 1 and Fram filters. Changed every 5K sold truck at 165000 miles...
Replies: 6
Views: 9,272
Posted By Michael

winter tires

This is worth a look, some really good info here.

http://www.youtube.com/watch?v=P03wqClnq-0

All about winter tires from our friends up north.
Replies: 20
Views: 17,318
Posted By Michael

Navydad, As I sugested before you might want to...

Navydad,
As I sugested before you might want to post your question on http://www.escape-central.com/ there are a lot of guys there that know a lot about Escape specific problems. There is one guy...
Replies: 20
Views: 17,318
Posted By Michael

Escape Questions

Try this site http://www.escape-central.com/
Replies: 14
Views: 3,484
Posted By Michael

Escape Info

Try this site for everything you wanted to know about Escapes
http://www.escape-central.com/
Replies: 8
Views: 29,571
Posted By Michael

Air Horn

Take a look at this site
http://www.hornblasters.com/
Worth a laugh:D
Replies: 1
Views: 1,008
Posted By Michael

Question 2001 jeep grand cherokee E-brake

Any one out there have any experiance with the e-brake cable breaking at the handle and the replacement of it? Dealer wants $400+ to repair.:wall: Any ideas???
Replies: 5
Views: 1,380
Posted By Michael

Bio

This may make your eyes bleed but......
http://forum.oiltechtalk.com/attachments/factfinding2.pdf

Try reading this
Replies: 17
Views: 3,531
Posted By Michael

Smoke tester

Please don't take this the wrong way but, on the smoke tester pump is the rubber hose connected to the pump inside the spring that protects the hose? Sometimes they come off and you wouldn't even...
Replies: 7
Views: 1,471
Posted By Michael

From my experience the 007's are good pumps the...

From my experience the 007's are good pumps the only time I have heard them make noise is when the bearings go bad or they get air in them. Remember they are water lubricated and cooled. When you...
Replies: 11
Views: 1,951
Posted By Michael

Taco

Am I missing something? Why would you want to replace the entire circ. when a cartridge is $59 bucks at the supply house? It's not a difficult job to change out!
Replies: 4
Views: 1,296
Posted By Michael

Osv

Grady,
Do the riellos have any issue with the 3"of vac that the OSV requires to open?
Replies: 4
Views: 1,296
Posted By Michael

OSV question

Hey Grady,
Did you ever find out about using an OSV with a riello?
I have a 330gal tank that feeds through a general filter and a westwood 10 micron filter w/vac gauge (single pipe system) to 2...
Replies: 4
Views: 918
Posted By Michael

Hard shift

If that trans is an E4OD the hard shift is related to the MLPS mounted on drivers side of the tranny. There are TSBs about this at alldata. Replace the MLPS and the problem should be fixed.
Replies: 6
Views: 1,102
Posted By Michael

Brake Bleeding

I'm sorry to sound this way but if you are having a problem finding the bleeders on the truck maybe you should let a service station do the job. There is a proper procedure for the job and what is...
05-17-07, 08:52 AM
Replies: 2
Views: 1,138
Posted By Michael

Question Intellicon_AC unit

Anyone have any input on the intellicon ac central air conditioning electrical consumption economizer? www.intellidynellc.com. Does anyone think its worth it or is it smoke and mirrors?
Replies: 71
Views: 11,497
Posted By Michael

1996 Ford Taurus

159000 miles 3.0L original transmission and still going strong!
Replies: 2
Views: 723
Posted By Michael

93 jeep

I would look at the ballast resistor. Check the voltage at the "bat" side of the coil it should be less than 12 volts when the engine is running. It only gets full voltage when cranking, not running.
04-26-07, 11:16 AM
Replies: 4
Views: 1,705
Posted By Michael

Drain Line

I would think that another reason would be so you know that the drain is running and not clogged. Also isn't condensate very acidic? I don't think you want that eating thru a pipe over time.
Replies: 12
Views: 1,206
Posted By Michael

"This is gonna light up the sky all white so make...

"This is gonna light up the sky all white so make sure you ain't in a garage and yeah, have a water hose or fire extinguisher handy, just in case"

And mess up the O2 sensors and maybe hydrolock...
Replies: 11
Views: 1,473
Posted By Michael

Not to smart

You never want to heat up a spildle / knuckle assembly cherry red with a torch. The part will not be safe to use after that. The simple answer is use a good 1/2 inch drive impact gun and it will come...
Replies: 11
Views: 1,473
Posted By Michael

Bolts

It would help knowing the yr and make of the car, but if you are talking about the bolts that hold the caliper bracket to the spindle try an impact gun, they are usually Very tight! Failing that use...
Showing results 1 to 25 of 55
 


 
Forum Jump