Search: Posts Made By: Rob Erickson
Showing results 1 to 9 of 9
Search took 0.01 seconds.
Replies: 16
Views: 473
Posted By Rob Erickson

Hi Manden, I checked the side wall, which...

Hi Manden,
I checked the side wall, which included the little tab coming out of the side of the wall as that is what a bulb would contact. There was no reading in either the tab or side wall.
Replies: 16
Views: 473
Posted By Rob Erickson

Hi Geo, Yeah, that is what I suspected. I guess...

Hi Geo,
Yeah, that is what I suspected. I guess the connection was loose, which is why it flickered at first, then went out when I stood up and impacted the bottom with my head. It wasn't that hard...
Replies: 16
Views: 473
Posted By Rob Erickson

Oh also, center pin to white was 120V, wall of...

Oh also, center pin to white was 120V, wall of socket to black was nothing.
Replies: 16
Views: 473
Posted By Rob Erickson

They fasten the terminal block to the ground...

They fasten the terminal block to the ground plate that grounds the whole cover plate. Not sure why I would want to remove them or what impact that might have.
Replies: 16
Views: 473
Posted By Rob Erickson

OK...first to your questions. The screw you...

OK...first to your questions. The screw you reference has holes through it. Based on Verpan's (manufacturer) installation instructions, the ground wire from the junction box threads through that...
Replies: 16
Views: 473
Posted By Rob Erickson

Hi, Not sure what you mean in the first part of...

Hi,
Not sure what you mean in the first part of your response. The socket isn't centered in the picture because the screws that mount the socket in place are removed so there is a little bit of play...
Replies: 16
Views: 473
Posted By Rob Erickson

Pictures

I will be attempting to test the socket using a multimeter later today. As you can see (in the pictures), the access is a bit of an issue as the socket is recessed inside the metal of the "onion" and...
Replies: 16
Views: 473
Posted By Rob Erickson

Hi Pete and thanks for responding. You are...

Hi Pete and thanks for responding.
You are correct about the volt tics limitations but for the purposes of confirming that power was reaching the socket itself, it does the trick. Given that there...
Replies: 16
Views: 473
Posted By Rob Erickson

Verpan Onion Pendant Lamp Mystery

Hello,
I am hoping someone out there can help me with a bit of a mystery. My wife bought an expensive Pendant Onion Lamp that I installed. I was an electrician once upon a time, so installing a...
Showing results 1 to 9 of 9


 
Forum Jump