Search: Posts Made By: bob1908
Showing results 1 to 25 of 129
Search took 0.01 seconds.
Replies: 3
Views: 955
Posted By bob1908

oh by the way i called the ford place and the gem...

oh by the way i called the ford place and the gem mod cost 345.65 and the fuse box 346.55 just remember if u go to junk yard to get it its a 50/50 chance it mite be messed up too expl if the leak...
Replies: 3
Views: 955
Posted By bob1908

thank you for your help yes the gem and fuse box...

thank you for your help yes the gem and fuse box had water in it bc ford has a leaking wind shield problem the upper left and upper right corners leak water so from 1997 to 2004 had this problem if u...
Replies: 3
Views: 955
Posted By bob1908

My 1998 Ford F150xlt is sick.

hi all
ecmy problems seams to start off with an airbag code 57 and my battery kept drains so bought new batt so i still had the airbag code and 1 time after going to wal mart i came home turn the...
Replies: 7
Views: 886
Posted By bob1908

about a 5618 for piston rings and belt then there...

about a 5618 for piston rings and belt then there shipping and the cost of putting the rod on piston i dont have a press to do that so figuring $110.00
Replies: 7
Views: 886
Posted By bob1908

Question the timing belt loose but that not the big...

the timing belt loose but that not the big problem the rings letting compression out looks like some carbon got in between piston and cylinder collapse 1st ring on piston
its a 2011 mower next...
Replies: 7
Views: 886
Posted By bob1908

Cool ok the vales move up and down has some...

ok the vales move up and down has some compression
Replies: 7
Views: 886
Posted By bob1908

Post husky lawnmower wont start

hit all i got from a friend a husqvarna hu700f self propelled mower the # on motor are gcv16la0 s3a nh1 and gjara 2398748 it a Honda ohv prodict code 961450006 00
ok here what it isn't doing running...
Replies: 8
Views: 982
Posted By bob1908

airbag lite flashing code 52 on 1998 ford f150

ok i tried to do hard reset i took the pos and neg cables and clamped them together 4 24 hours and its a no go any advice would help still flashing 52
Replies: 8
Views: 982
Posted By bob1908

the air bag code 52 is low or lost battary...

the air bag code 52 is low or lost battary volatge will this code drain the battary right after the airbag light started flashing the next day i went to my truck and it was dead as a door nail so...
Replies: 8
Views: 982
Posted By bob1908

Cool 1998 Ford F150 flashing service light

hi all i have 1998 ford f150 with 4.2 v6 im getting a code light for my airbags it flashing 52 how do i clear this code and will this code drain my battary?? any help would be helpful
Replies: 1
Views: 598
Posted By bob1908

it wont crank

2001 chevy claver 2.2 wont crank chk batt and conn all good had satrter chk out @ local parts hose it ok no power @ starter sence wire on starter had ign turn to satrt pos thinking park nutral safty...
Replies: 1
Views: 972
Posted By bob1908

coleman powermate 2250watt gen

hi i got a clomean powermate gen model#PM0542000.01 brushless
the moter runs great ....the problem is the gen only outputs like 77 volts not 120 what could be the problem
Replies: 9
Views: 1,004
Posted By bob1908

gov problem

ok good news i got gov in place and reassembled and adjusted and running but......
can any one tell me if the valves are adjuastable on this motor i hate to take the valve cover off the motor to...
Replies: 9
Views: 1,004
Posted By bob1908

gov problem

ok i took the kolar apart found the govner gear and all it parts sitting bottom of motor i got it all back to gether but how do u adlust the govr linkage from the gov shaft to the carb
Replies: 9
Views: 1,004
Posted By bob1908

does anybody have a break down of the motor kolar...

does anybody have a break down of the motor kolar command cv15s
Replies: 9
Views: 1,004
Posted By bob1908

gov

no it wont stay running with choke open it has to have some choke to keep running i chk the butterfly on the throdl and it moving just fine i chk for end play on it dont move side to side but would...
Replies: 9
Views: 1,004
Posted By bob1908

Governor problems

hi all i got a kolar commander 15.0 hp with oli pump and filter model cv15s when i start the motor it run in full chock but when you move the laver to fast it runs real high idel but then die i...
Replies: 9
Views: 1,601
Posted By bob1908

update after doing an all night soaking on the...

update after doing an all night soaking on the carb i put it in my bubbler tank for about 30 min this morn and then blew out the ports on carb then i put it back on motor and now when fulled choked...
Replies: 9
Views: 1,601
Posted By bob1908

i adjusted the carb screw all the way in to all...

i adjusted the carb screw all the way in to all the way out all the way in still runs with choke on all the way out completed removed it quits running it seams not to affect the card opration @ all
Replies: 9
Views: 1,601
Posted By bob1908

i got a cople of 42" decks looking for the...

i got a cople of 42" decks looking for the linkage from the mower to the deck i picked a cpole of decks for 20.00 and have some parts for the decks new spindals blade and idlers just tring to fig out...
Replies: 9
Views: 1,601
Posted By bob1908

i adjusted the carb screw all the way in to all...

i adjusted the carb screw all the way in to all the way out all the way in still runs with choke on all the way out completed removed it quits running it seams not to affect the card opration @ all
Replies: 9
Views: 1,601
Posted By bob1908

thats is great thank you now 1 other question if...

thats is great thank you now 1 other question if i keep the motor fully chock it will run but if i open the chock it stalls and quits running i took the carb off and cleand it cleaned all the little...
Replies: 9
Views: 1,601
Posted By bob1908

crastman manual for 917.256550 rider with kolar commander motor

hi all
happy hollidays to u all
i looking for a manual for 917.256550 i got this rider cheep (25.00)
i needed a battary and a carb clean out runs great but it has no decki know it takes 42" but...
Replies: 2
Views: 1,069
Posted By bob1908

valve abjustment on 17.5 B&S ohv

HI all
is the valve adjustemnts on a 17.5 B&S ohv the same as a 15.5 ohv
.003 to.005 intake and .005 to.007 ex
Replies: 8
Views: 1,064
Posted By bob1908

Question yes the slave cylnder is in the bellhousing and...

yes the slave cylnder is in the bellhousing and tranny has to be removed to replace it and yes i cleared the code with a scan tool
Showing results 1 to 25 of 129
 


 
Forum Jump