Search: Posts Made By: bullseyepr
Showing results 1 to 25 of 40
Search took 0.01 seconds.
Replies: 7
Views: 646
Posted By bullseyepr

Thanks for all your help. From the pictures...

Thanks for all your help.

From the pictures attached it looks like it is using terminals 24 & 25. There is a 4208 box. There is another box with what looks like a single antenna.

I am going to...
Replies: 7
Views: 646
Posted By bullseyepr

Hi, the previous owner is long gone, so that is...

Hi, the previous owner is long gone, so that is not an option right now. Its an OLD alarm. If it works and keyboards can be replaced it will be an easy and cheap solution.
but if it is too...
Replies: 7
Views: 646
Posted By bullseyepr

First Alert FA1300C & FA250KP

Hi, my brother is about to close on a house that has a FA1300C with 3 FA250KP keypads. From what I have read it is a re branded Ademco. (I guess a 4140XMPT??)
The alarm is turned off right now. ...
05-09-18, 09:28 AM
Replies: 1
Views: 218
Posted By bullseyepr

DIY Wiring a generator to two breaker panels

Is there a DIY reasonable way to wire a Honda eu6500 to two breaker panels? I realize all the safety issues, but looking for sugestions.

Thanks for the help!
Replies: 5
Views: 1,531
Posted By bullseyepr

Vista 20p louder chime??

I have a 20p and in some parts of the house I dont hear the chime. Any way to make it louder or add something so its heard all over the house? I have an interior siren, could it also do chime??
...
Replies: 2
Views: 842
Posted By bullseyepr

Well I finally installed the 4232 module. It is...

Well I finally installed the 4232 module. It is working great with my system but the vista icm is still installed. Lets see if when I physically remove the icm there is any problem.

Thanks!!!!
Replies: 2
Views: 842
Posted By bullseyepr

Vista 20p - changing from Vista icm to 4232cbm

Hi!!! I am changing my Vista icm for a 4232cbm. Already read the instructions for the install. Anything to "undo" in programming after removing the ICM??

Thanks!!
Replies: 17
Views: 1,405
Posted By bullseyepr

Thanks!!!!!!!!!!!:):):):):) Finally done!!!!...

Thanks!!!!!!!!!!!:):):):):)

Finally done!!!!
Upstairs the 5 non responsive windows were also stuck. My hammer fix them.
In fact, last year, after just 1 month in the new home had some lightning...
Replies: 17
Views: 1,405
Posted By bullseyepr

In fact, the 3 of the 11 windows that were not...

In fact, the 3 of the 11 windows that were not reporting fault were stuck. Nothing a hammer will not fix.:cool:
The system uses Flair vip88 sensors. Are those so bad??
All this in a year and a...
Replies: 17
Views: 1,405
Posted By bullseyepr

As soon as I took the wire from zone #5 and #11 -...

As soon as I took the wire from zone #5 and #11 - #15 I got fault messages from the alarm.
Does it help us??

What could make 3 widows of 11 in zone #4 not give a fault?

My zone expander...
Replies: 17
Views: 1,405
Posted By bullseyepr

Well, lets start from the beginning, first I...

Well, lets start from the beginning, first I changed one of the 6150 for a 6160 to be able add a Vista Icm to integrate to my home automation system. I decided to add a zone expander to be able to...
Replies: 17
Views: 1,405
Posted By bullseyepr

Thanks! I must have screwed something else....

Thanks!

I must have screwed something else. It seems none on the wires triggers the zone

Keep trying!!!
Replies: 17
Views: 1,405
Posted By bullseyepr

I finally installed the 4229. As I have read all...

I finally installed the 4229. As I have read all zones need resistors.
I have been able to separate the entry doors, but hasnt been able to do the windows.
How do I determine what wire goes to...
Replies: 17
Views: 1,405
Posted By bullseyepr

Again wrong, 6150 and 6160!!!

Again wrong, 6150 and 6160!!!
Replies: 17
Views: 1,405
Posted By bullseyepr

My wrong, I have a 5160 and a 6160 keypads. And...

My wrong, I have a 5160 and a 6160 keypads.
And yes the cables all run to the alarm box and are spliced inside the box. I know I have to separate them.
Thanks for your help!!
Replies: 17
Views: 1,405
Posted By bullseyepr

Adding a 4229 to a vista 20p

Hi!!
I just moved and my new house has a Vista 20p. All the front doors are under 1 zone and back doors on another zone. The same happen with all the windows. I would like to separate all the...
Replies: 4
Views: 768
Posted By bullseyepr

Thanks I will try it. In my Vista 20P I can...

Thanks I will try it. In my Vista 20P I can change the serial number without deleting everything.

Thanks for your help!
Replies: 4
Views: 768
Posted By bullseyepr

Thanks, but i need to replace a 5816 sensor and...

Thanks, but i need to replace a 5816 sensor and dont seem to be able to do it
Replies: 4
Views: 768
Posted By bullseyepr

ADT- lynxr

I am helping a friend with his alarm. I have worked with a 20p a 5816 contact is not working. I have the installer code and can get to *56 on its zone. But dont get it how to change the serial...
Replies: 1
Views: 1,485
Posted By bullseyepr

Safewatch 3000 - Motion Sensor

I have a Safewatch 3000 with 2 wireless motion sensors. I would like that the motion sensors "report back" to the panel when the alarm is not activated or in stay mode, so my home automation system...
10-25-10, 09:01 PM
Replies: 3
Views: 3,699
Posted By bullseyepr

I do use Control4 in my house. Been using it for...

I do use Control4 in my house. Been using it for a year and we are very happy with it.

It is not intended to be a diy system.

Please let me know if you have other questions.
Replies: 4
Views: 1,118
Posted By bullseyepr

Any ideas?? Thanks again for your help.

Any ideas??

Thanks again for your help.
Replies: 4
Views: 1,118
Posted By bullseyepr

I don't think the keypads are dirty because when...

I don't think the keypads are dirty because when I press the button I get a Beep and also the phone module don't recognize the user code. It respond to the phone code but not to the user 4 digit...
Replies: 4
Views: 1,118
Posted By bullseyepr

Disarming Safewatch 3000

In the last couple of days when I am going to disarm the alarm I press the code and have to press the 1 button two times for disarming. It happens on both of my 6160's. The 5804 are working fine.
...
Replies: 2
Views: 855
Posted By bullseyepr

Thanks MrRonFL youre always there to help !! ...

Thanks MrRonFL youre always there to help !!

Yes I have a wireless receiver and have the installation manual.

After reading I have a few doubts, I left partition as 1,
in report code I used...
Showing results 1 to 25 of 40
 


 
Forum Jump