Search: Posts Made By: birch
Showing results 1 to 25 of 200
Search took 0.03 seconds.
11-28-18, 05:03 PM
Replies: 16
Views: 683
Posted By birch

Nope..not determined to change pump, but trying...

Nope..not determined to change pump, but trying to get educated to the inner workings to determine possible causes. I figure if I go armed with $200 worth of parts, something should do the trick. ...
11-27-18, 05:40 PM
Replies: 16
Views: 683
Posted By birch

Good idea about the coupling. Most of the pumps...

Good idea about the coupling. Most of the pumps I am looking at have solenoids attached. Do they need to be wired? If so, are there connections required? Can it run without wiring it?
11-27-18, 04:12 AM
Replies: 16
Views: 683
Posted By birch

Hope these pics help. Hopefully I will get there...

Hope these pics help. Hopefully I will get there this weekend and can share more details. I will bring a new pump and nozzle just in case.
11-21-18, 10:49 AM
Replies: 16
Views: 683
Posted By birch

Yes..I removed the tube completely Andy ran the...

Yes..I removed the tube completely Andy ran the unit. Nothing came out of port that connects to tube. Maybe that 90* port coming from the pump is blocked? I guess I will head there with a new pump...
11-20-18, 07:04 PM
Replies: 16
Views: 683
Posted By birch

Thanks..yes the bleed comes out at a normal, good...

Thanks..yes the bleed comes out at a normal, good rate.
The problem is 3 hours from my home and unfortunately an hour ride (round trip) from a parts store. So I’m trying to figure as much out as...
11-20-18, 04:51 PM
Replies: 16
Views: 683
Posted By birch

The screen is clean. My friend said he cleared...

The screen is clean.
My friend said he cleared the line and purged until straight kerosene came through and it ran fine for 10 mins.fuel was getting to the screen, but no further. I was wondering...
11-20-18, 02:01 PM
Replies: 16
Views: 683
Posted By birch

Clogged fuel pump on oil burner

I recently had a problem with my furnace not starting in my ski house. It turned out the pickup inside the tank had broken off. I paid a fiend to fix it. When I got there this weekend, it would not...
04-04-18, 02:53 PM
Replies: 1
Views: 326
Posted By birch

Pipe size for LP to fireplace

I recently installed an LP fireplace 45,000 btu and had a plumber run the black pipe to a place where a tank would be dropped. He ran 32 total feet in 1/2 inch. The gas company recommended...
04-29-16, 04:33 AM
Replies: 4
Views: 801
Posted By birch

Thanks bud. I have a few questions. 1. "A...

Thanks bud. I have a few questions.
1. "A couple of problems here. One, the fiberglass insulation was installed without the drywall which would have served as an air barrier. "
What does this...
04-27-16, 04:29 AM
Replies: 4
Views: 801
Posted By birch

I was having a tough time attaching pics....

I was having a tough time attaching pics. Hopefully this works
Cheers!6553165532
04-25-16, 09:58 AM
Replies: 4
Views: 801
Posted By birch

Sealing/insulating exposed foundation

The room I am renovating has 2 exterior walls that are 4' cement foundation. Most is above grade. The 3rd pic shows a 10' section that is partially below grade due to a planting bed (u can see some...
01-08-16, 02:14 PM
Replies: 10
Views: 807
Posted By birch

Nyjets volts checked out at 240. The ohms didn't...

Nyjets volts checked out at 240. The ohms didn't register anything (assuming I did it correctly which I think I did). I guess that means heater is bad even though it is relatively new. I see that I...
01-07-16, 06:28 PM
Replies: 10
Views: 807
Posted By birch

So let's say the heater, circuit board and pump...

So let's say the heater, circuit board and pump are all working properly. What other causes could their possibly be?
Cheers
01-06-16, 07:08 PM
Replies: 10
Views: 807
Posted By birch

Am I correct in thinking the thermostat is...

Am I correct in thinking the thermostat is working since the light stays on telling that it has not reached the set temp?
01-06-16, 06:17 PM
Replies: 10
Views: 807
Posted By birch

Dumb question but if the ohms and volts measure...

Dumb question but if the ohms and volts measure to what you say then the heater is working properly?
Cheers
01-06-16, 02:57 PM
Replies: 10
Views: 807
Posted By birch

I am now trying to decide wether I should buy the...

I am now trying to decide wether I should buy the few remaining things that can be wrong ( like a thermostat) or pay the $150 for a service call. The heating light lights and should shut off when...
01-06-16, 01:28 PM
Replies: 10
Views: 807
Posted By birch

Hot tub misery

I have a thermospa hot tub that is about 10 yrs old. Recently I checked it and it had shut off. The error code read overheat (OH). Turned it back on and it ran but would not heat up at all. I...
Replies: 11
Views: 830
Posted By birch

I hand a radiant guy come. He told me that it...

I hand a radiant guy come. He told me that it would def. heat the room (I didn't expect him to say differently and lose a possible job). He recommended tying tubing directly to the slab and...
Replies: 11
Views: 830
Posted By birch

Wow...I didnt expect that much of a btu...

Wow...I didnt expect that much of a btu difference. To me it is not worth the expense if I still have baseboard. Thanks for the info. you guys gave me what I needed...basic knowledge. I would have...
Replies: 11
Views: 830
Posted By birch

Ok..there is about 37ft of baseboard in the room....

Ok..there is about 37ft of baseboard in the room. I figure furniture would take up around 100 sq ft of floor space leaving 200x25= 5000 btuh. The room has a chill on the "coldest days", but is is...
Replies: 11
Views: 830
Posted By birch

I have a contractor coming to give me an estimate...

I have a contractor coming to give me an estimate so I will pick his brain. However I Want to be sure it will be enough to heat my room (16x19 ground level concrete slab, 2 walls mostly winows and...
Replies: 11
Views: 830
Posted By birch

Thanks...I know I'm asking a lot, but I like to...

Thanks...I know I'm asking a lot, but I like to have a good idea about what is needed before hiring or attempting myself. The room:
*is 19x16.
* It is a living room that has windows and French...
Replies: 11
Views: 830
Posted By birch

Radiant heat over existing slab

I have a room that has a concrete slab floor. I would like to install radiant heat using water tubes. After researching, Every site seems to have different ideas for prep. I have an older oil...
Replies: 4
Views: 700
Posted By birch

Not sure of other info. It is 3000psi. It does...

Not sure of other info. It is 3000psi. It does not have a built in detergent tank or hose. Is there something you would attach between the water hose and the washer? Or is there something you...
Replies: 4
Views: 700
Posted By birch

Powere washer soap

I have an older Honda 3000 11 hp gx340 powere washer. Does anyone know if there is a way to add an inline detergennt cartridge or some sort of system to wash my home instead of only using water?
...
Showing results 1 to 25 of 200
 


 
Forum Jump