Search: Posts Made By: Integraoligist
Showing results 1 to 25 of 48
Search took 0.01 seconds.
09-14-11, 09:11 PM
Replies: 3
Views: 879
Posted By Integraoligist

Ok, it does it at the faucet and at the...

Ok, it does it at the faucet and at the sprayer... tried the valves, both the hot and cold do it.

I just noticed that it does NOT slap when the dish washer is on. But thats only connected to the...
09-12-11, 08:21 AM
Replies: 3
Views: 879
Posted By Integraoligist

Help with water from faucet "slapping" after sink/faucet change out.

I changed out my kitchen sink and faucet... and ever since then there has been some type of slap (best way to describe it) every 7 seconds.

I did not change out anything besides the faucet, I...
08-14-11, 12:51 PM
Replies: 4
Views: 24,411
Posted By Integraoligist

I dont have any trim or anything on it besides...

I dont have any trim or anything on it besides the 2x4s, so adding lumber is not that big of issue.
If the doors are exactly 59" with no gap when pushed togeather, how much space do I need for the...
08-14-11, 10:48 AM
Replies: 4
Views: 24,411
Posted By Integraoligist

Help with double bifold doors install into rough frame

I made a standard 60" rough door frame for a new set of bifold doors, so with width is 62"... well the bifolds i just got are called 60" and when I measure them they are both 29 1/2" making them...
Replies: 2
Views: 23,230
Posted By Integraoligist

Sealing the seams of Laminate flooring in a kitchen

I installed a nice thick laminate flooring in my kitchen/dining room/utility room area last week... 3 days after the install the washing machine leaked (which of course has never happened before)......
06-16-11, 06:39 AM
Replies: 8
Views: 11,543
Posted By Integraoligist

equinox, According to the manufacturers of the...

equinox,
According to the manufacturers of the couple of self-leveling cement places that i've talked to, i can not use it over this glue that is already on the floor. A cement bonding agent is out...
06-12-11, 02:56 PM
Replies: 2
Views: 2,772
Posted By Integraoligist

Everyone that i've talked to and shown this said...

Everyone that i've talked to and shown this said it was the asbestos glue and tile, the tile looked like how comercial tile looks now but was nasty yellow with black spots in it and was 9"x9"

I...
06-11-11, 05:17 AM
Replies: 2
Views: 2,772
Posted By Integraoligist

Help with install of Loose Lay Vinyl sheet flooring.

I have an uneven concrete slab with mastic all over it that is made with asbestos. 1/2 of the room is flat and the other have was laid uneven and goes from the same height as the other side to a 1"...
Replies: 2
Views: 1,750
Posted By Integraoligist

New Metal Pole Barn roofing over my kitchen/dining area... what color?

Hey all,
Decided to go ahead and spend the extra cash and cover my whole low-slope flat roof in metal pole-barn sheets instead of replacing the cracking old rubber roll thats on there now.

They...
06-09-11, 10:38 AM
Replies: 8
Views: 11,543
Posted By Integraoligist

Ok, 1. What kind of cement/concrete do I use to...

Ok, 1. What kind of cement/concrete do I use to float out that area?
2. The asbestos cutback does not want to come up at all! After reading some more info on it, apparently i can not put tile over...
Replies: 1
Views: 1,446
Posted By Integraoligist

Replacing Flat Roof... what do I use?

I tried coating the roof with fibered roof coating to help give it a couple of years before I have to replace the whole thing... but it continues to leak. Today it rained and I went up there and...
06-06-11, 07:52 AM
Replies: 8
Views: 11,543
Posted By Integraoligist

And if I try to put tile down, do I have to use...

And if I try to put tile down, do I have to use cement board or is 23/32 x 4 x 8 Plywood Sheathing Sub-floor sufficient?
06-05-11, 01:01 PM
Replies: 8
Views: 11,543
Posted By Integraoligist

Here are a couple photos... No, i did not want...

Here are a couple photos...
No, i did not want to do laminate anywhere, i already have it in my living room and wanted this kitchen and dining area to be stained concrete. But you can see the black...
06-05-11, 09:45 AM
Replies: 8
Views: 11,543
Posted By Integraoligist

Wink Do I need a subfloor over concrete?

Hey all,
Here is my situation. I am on a Slab of concrete in my kitchen and dining room. It's pretty much a 400 sq. ft. square with a bar coming out of center about 8 ft.

Well, it's not...
06-02-11, 10:23 AM
Replies: 7
Views: 9,178
Posted By Integraoligist

Mitch, when I was doing research it was 50/50......

Mitch, when I was doing research it was 50/50... 1/2 said you do need it, the other 1/2 said you do not... being this is the Ultralight, wouldn't 1/2" be alright?


When the 24OC sagged, was it...
06-02-11, 09:05 AM
Replies: 7
Views: 9,178
Posted By Integraoligist

oh yes, I also wanted to know if getting the...

oh yes, I also wanted to know if getting the Moisture-Resistant type would be the way to go... or is that just a waste of money?
I am near Chicago

Thanks again!
06-02-11, 09:01 AM
Replies: 7
Views: 9,178
Posted By Integraoligist

1/2" Sheetrock Ultralight good for 24"OC kitchen ceiling?

Hey all,
removed my old plywood and plaster ceiling in my kitchen and dining room which had no insulation in it...
I'm adding insulation and am now ready for drywall but need a bit of help.
...
04-27-11, 06:18 PM
Replies: 8
Views: 2,047
Posted By Integraoligist

The panel is a very old fuse panel... i actually...

The panel is a very old fuse panel... i actually retightened everything a few weeks ago, as there were wires that were loose. There is no ground connected to anything, maybe this is the issue with...
04-26-11, 08:32 PM
Replies: 8
Views: 2,047
Posted By Integraoligist

The lights and fan are not Gfci protected,when...

The lights and fan are not Gfci protected,when the Gfci trips off the only thing that's turns off is the Gfci socket, not the lights and fan.

It did it again today, I looked at the outside of the...
04-26-11, 12:44 PM
Replies: 1
Views: 707
Posted By Integraoligist

Freaking doors, dont know what my problem is with these things!

I dont know why i have so many issues with doors....
Here is the latest one i'm attempting to put into the bathroom. This house is about 100 years old and nothing is plumb or straight so i'm doing...
04-25-11, 08:58 PM
Replies: 8
Views: 2,047
Posted By Integraoligist

Only have the one GFCI box and the one set of...

Only have the one GFCI box and the one set of switches, the set of switches is a 3 terminal on/off... 1 goes to the center light (connected inside the fan) 2nd is the lights over the vanity, 3rd is...
04-25-11, 02:04 PM
Replies: 8
Views: 2,047
Posted By Integraoligist

Replaced regular socket with a GFCI outlet, now it pops off all the time!

Hey all,
I am redoing our old bathroom which had a regular outlet by the sink... i replaced it with a new GFCI outlet. It works fine except that every couple of days it will pop off.

When I...
Replies: 1
Views: 2,131
Posted By Integraoligist

Toro 22" Recycler Transmission - what grease do I use?

I just recieved the parts to my 22" Recycler mower, the transmission gears need to be replaced.

Question is, what kind of grease do I use on them? White Lithium Grease?

Thanks all!
03-29-11, 08:11 PM
Replies: 10
Views: 7,323
Posted By Integraoligist

I've been looking up the Hardie at the stores...

I've been looking up the Hardie at the stores sites and the only thing that comes up is Hardie Shingles. No 4x8 sheets or anything. Are these the only way they come?
03-28-11, 06:08 PM
Replies: 10
Views: 7,323
Posted By Integraoligist

Here is an Engineered Wood Siding: Shop...

Here is an Engineered Wood Siding:

Shop SmartSide 3/8" x 8' x 4' Engineered Wood Siding at Lowes.com...
Showing results 1 to 25 of 48
 


 
Forum Jump