Search: Posts Made By: Akpsdvan
Showing results 1 to 25 of 200
Search took 0.03 seconds.
08-17-19, 10:54 AM
Replies: 3
Views: 131
Posted By Akpsdvan

Hellenbrand and Marlo are National companies .....

Hellenbrand and Marlo are National companies .. and good with the clack valve.
At least the Hellenbrand is in Alaska for years.

Having a local person can be great or a bad thing depending on the...
08-11-19, 12:30 PM
Replies: 1
Views: 151
Posted By Akpsdvan

9500? that is more times than not a Commercial...

9500? that is more times than not a Commercial system with large plumbing in and out.
Does the timer and the like set in the middle of two tanks?
That would be 8500 and yes it would be good to...
07-24-19, 04:21 PM
Replies: 3
Views: 329
Posted By Akpsdvan

What o ring did you change? Is the bypass...

What o ring did you change?

Is the bypass lined up with the valve body? is it straight in?

I am in the dark as to why your system is leaking, need more information on Where it is Leaking FROM...
07-23-19, 04:07 PM
Replies: 1
Views: 248
Posted By Akpsdvan

Depending on the unit the timer motor may make...

Depending on the unit the timer motor may make some noise as it ages.

Putting the system in bypass will not Change How the Motor runs , un plugging it will stop the motor.

Is there water to...
07-21-19, 10:46 AM
Replies: 4
Views: 567
Posted By Akpsdvan

Any system reaches a point where the media needs...

Any system reaches a point where the media needs to be changed out with new media.

This goes for the cheep Home Depot - Lowes or on line system to the brand names like Kinetico , Culligan and the...
07-21-19, 10:41 AM
Replies: 3
Views: 329
Posted By Akpsdvan

There are No photos or a way of getting there. ...

There are No photos or a way of getting there.

But with the from behind leads me to think that it is all in one unit, like sears , GE or the like and the salt water is over flowing?

Putting the...
07-10-19, 12:51 PM
Replies: 1
Views: 490
Posted By Akpsdvan

When was the last time that I used the center...

When was the last time that I used the center wheel with the people.... oh 25 years ago....

If your going to push the system then ....

48,000 is going to take 15 lbs of salt per regen.

If...
07-03-19, 09:59 AM
Replies: 1
Views: 555
Posted By Akpsdvan

Fleck 5600 SXT and media tank depending on flow...

Fleck 5600 SXT and media tank depending on flow rate. The media tank should have a dome hole so that you can put more media in.
This set up would be the simplest.
The valve would go through a...
06-26-19, 10:16 AM
Replies: 2
Views: 697
Posted By Akpsdvan

You can remove the head from the rest of the...

You can remove the head from the rest of the valve body and that will remove pressure from main piston and brine piston.
It might be easier to turn the knob through its cleaning steps.
Also while...
06-23-19, 10:25 AM
Replies: 5
Views: 827
Posted By Akpsdvan

Sounds like it is time to have a test from...

Sounds like it is time to have a test from Watercheck on Before the system and another test after the system.
It is going to be about the only way to find out what is going on for your water and...
06-18-19, 06:53 PM
Replies: 1
Views: 767
Posted By Akpsdvan

Did the old or even the new filter have the...

Did the old or even the new filter have the rubber gaskets at the top and bottom?
Was the old gasket removed from the sump?
Did it set down on the nipple at the bottom of the sump? Did it go over...
06-16-19, 02:24 PM
Replies: 1
Views: 1,003
Posted By Akpsdvan

Think that there is one out of Kentucky and then...

Think that there is one out of Kentucky and then there is Ebay... they have new kits from time to time and there are often used or rebuilt parts.
05-26-19, 05:35 PM
Replies: 8
Views: 1,319
Posted By Akpsdvan

The metal clips are what hold the yoke to the...

The metal clips are what hold the yoke to the bypass and the bypass to the meter and the meter to the valve body.
Bypass into bypass and undoing the clips that hold meter to bypass the softer will...
05-26-19, 11:09 AM
Replies: 8
Views: 1,319
Posted By Akpsdvan

There are 2 ways. 1 would be to remove the...

There are 2 ways.
1 would be to remove the brine drain housing assembly from the 5600 body-read up on that part in the manual.
2 cut about 2inches past the elbow and when the unit goes back in put...
05-14-19, 05:35 PM
Replies: 6
Views: 450
Posted By Akpsdvan

Seal pack and piston are going for about 50.00...

Seal pack and piston are going for about 50.00 right now on Ebay...... both work for your systems.

Kinetico system is really a dealer work on only, if customer works on it , what will that do to...
05-12-19, 01:10 PM
Replies: 1
Views: 147
Posted By Akpsdvan

A clue, the valve is Clack with Evolve spin, the...

A clue, the valve is Clack with Evolve spin, the tank is Empress and then Carbon is NSF
So all has nsf.

Or the corp has Paid NSF to get the stamp on the equipment.
05-12-19, 01:05 PM
Replies: 6
Views: 450
Posted By Akpsdvan

Why is the pressure tank needing to be replaced? ...

Why is the pressure tank needing to be replaced?

What is the water Quality? why is the ph correction needed?

What equipment do you have right now?

Sounds like some is because they can.
04-20-19, 11:30 AM
Replies: 1
Views: 240
Posted By Akpsdvan

Local Big Box store should have salt. Maybe...

Local Big Box store should have salt.

Maybe get two bags of extra course and put in salt tank.

It will need to soak for about 3 hours.

With out knowing or seeing your system it would be hard...
04-12-19, 08:21 PM
Replies: 3
Views: 298
Posted By Akpsdvan

The ro might have parts and filters on Ebay. ...

The ro might have parts and filters on Ebay.

The Neutriler can be put in bypass and then the control head removed from the bypass and then the head removed from the tank and the tank up ended and...
04-12-19, 08:36 AM
Replies: 5
Views: 220
Posted By Akpsdvan

Depending on the make and model of the system a ...

Depending on the make and model of the system a re-bedding of system might be in order.

Interesting that one goes on line to look for answers from people not of an on line water treatment company...
03-27-19, 12:42 PM
Replies: 1
Views: 170
Posted By Akpsdvan

Either works if there is no Iron or Mn in the...

Either works if there is no Iron or Mn in the water.

The strips or meter are in ppm not grains.

Softeners are set up for grains per gallon

Capacity / Comp Hardness - Daily average = meter in...
03-23-19, 12:45 PM
Replies: 14
Views: 1,218
Posted By Akpsdvan

The 30,000 grain is the MAX.... with the Max Salt...

The 30,000 grain is the MAX.... with the Max Salt setting.....

So unless your at the max salt setting your not at the 30,000 grain capacity.

Eco water is a better control over the Sears or GE...
03-13-19, 12:01 PM
Replies: 14
Views: 1,218
Posted By Akpsdvan

Do you have an RO under the sink? Do you...

Do you have an RO under the sink?

Do you leave a faucet running even just a little?

If the city water is 18, is that the average between the wells? what is the high and low?

It could be that...
03-10-19, 03:46 PM
Replies: 6
Views: 431
Posted By Akpsdvan

What size micron is the filter? is it the 2x10 or...

What size micron is the filter? is it the 2x10 or a 4x10 or 4x20?

Again chlorine use depends on water quality and water usage......

Some thing to think about is having a well driller working...
03-10-19, 01:15 PM
Replies: 6
Views: 431
Posted By Akpsdvan

You will need to know the water quality and the...

You will need to know the water quality and the quantity. Greensand filters are heavy and need gpm for proper backwash, failure to do so will shorten the life of the media. If the system sat for a...
Showing results 1 to 25 of 200
 


 
Forum Jump