Search: Posts Made By: Greenguy1
Showing results 1 to 25 of 176
Search took 0.02 seconds.
11-19-08, 04:14 AM
Replies: 5
Views: 8,276
Posted By Greenguy1

I live in Mich. and the pump and dump is quite...

I live in Mich. and the pump and dump is quite popular in my area (Canadian Lakes) and yes there is something to be said about the oxidation element with respect to mineral build-up. I personally...
11-19-08, 03:57 AM
Replies: 4
Views: 1,150
Posted By Greenguy1

Aren't the elect. elements after the heat...

Aren't the elect. elements after the heat exchange coils? if so how can they benefit the defrost cycle ?
Replies: 7
Views: 1,985
Posted By Greenguy1

How about linden or pear many varieties and...

How about linden or pear many varieties and popular for blvds
11-10-08, 01:14 PM
Replies: 2
Views: 876
Posted By Greenguy1

No eventually the compressor will shut off also,...

No eventually the compressor will shut off also, it seems to do it when the 2 temps. (set and ambient) are the same.
11-10-08, 03:57 AM
Replies: 2
Views: 876
Posted By Greenguy1

condenser fan ?

When the indoor temp reaches the set temp the outdoor condenser fan stops and the compressor continues to operate with no airflow, is this normal?
Replies: 5
Views: 947
Posted By Greenguy1

I actually want the thermal units from the water,...

I actually want the thermal units from the water, I still have not found any source for what I need to accomplish this, the air handlers are not what I need It's the coils that I need and they are a...
Replies: 5
Views: 947
Posted By Greenguy1

Thanks for the reply Grady, I originally wanted...

Thanks for the reply Grady, I originally wanted to make a coil stack or rather have it made with a fan on the top to draw air like your typical outdoor ac unit coils, I contacted several...
Replies: 5
Views: 947
Posted By Greenguy1

looking for a L finn tubing supplier

I have been unsuccessful in finding a supplier of L finned tubing for liquid to air heat transfer, is there a source out there for just the base board tube with the alum fins without all the metal...
09-16-08, 03:59 AM
Replies: 10
Views: 9,343
Posted By Greenguy1

How does a dba work

How does a dba work, is it only good in the state and county that it is registered in?
08-12-08, 06:46 PM
Replies: 5
Views: 9,371
Posted By Greenguy1

Did you guys see the date of that post? it was 2...

Did you guys see the date of that post? it was 2 years ago!
07-24-08, 04:34 AM
Replies: 2
Views: 1,075
Posted By Greenguy1

you loose pressure cause zone 2 is always on when...

you loose pressure cause zone 2 is always on when another zone is manually selected so you have 2 zones on at the same time, unplug the timer to make sure it is not internally shorted to zone 2 and...
07-24-08, 04:21 AM
Replies: 3
Views: 3,072
Posted By Greenguy1

there are easy outs for removing these, and home...

there are easy outs for removing these, and home depot has them, and yes if the head is broken you will lose most of the pressure.
07-24-08, 04:16 AM
Replies: 5
Views: 1,143
Posted By Greenguy1

stone for sure, but not the cedar mulch, it will...

stone for sure, but not the cedar mulch, it will not hold up to the activity of all the little feet digging and tearing.
Replies: 2
Views: 1,237
Posted By Greenguy1

I have a 15 horse that does the exact same thing,...

I have a 15 horse that does the exact same thing, I believe it is in the coils under the flywheel because I put a new module in and still never know if it will start, and it is all about the...
Replies: 7
Views: 1,906
Posted By Greenguy1

I still own a few things with points in them one...

I still own a few things with points in them one of them being my 1988 Carver, I have thought about converting it to solid state but enjoy the reliability of points, I mean they can always be filed...
Replies: 7
Views: 1,906
Posted By Greenguy1

Thanks for the reply, that is what I was...

Thanks for the reply, that is what I was thinking, I am a ford man and alwys set the gap only, but my boat engines have a gap and dwell setting and I never really asked the question before.
07-14-08, 04:16 PM
Replies: 2
Views: 2,046
Posted By Greenguy1

Yes sir! in MI. the law states that the RPAVB or...

Yes sir! in MI. the law states that the RPAVB or bac-flo preventer must be 12" above the highest head, or you can use a double check in the basement at the source.
07-14-08, 04:03 PM
Replies: 9
Views: 1,181
Posted By Greenguy1

220vs.110

I have always heard that 220 motors are cheaper to operate than 110 but when I do the math IxE it comes up equal, is it the start?
Replies: 7
Views: 1,906
Posted By Greenguy1

Point gap and dwell

what is the diff. between point gap and Dwell, and what if you set the gap only?
07-11-08, 03:55 AM
Replies: 3
Views: 2,837
Posted By Greenguy1

When you disassemble ensure everything is kept...

When you disassemble ensure everything is kept clean, I will usually dig the dirt away and spray the valve clean with a hose and then bail out the excess water before disassembly, make sure that you...
07-11-08, 03:41 AM
Replies: 3
Views: 2,039
Posted By Greenguy1

you can use a garden hose and a rag or anything...

you can use a garden hose and a rag or anything to seal around the hose end and stick it in the sprinkler cup with the head removed and turn on the hose, be sure to remove the head upstream so any...
07-10-08, 03:51 AM
Replies: 3
Views: 2,039
Posted By Greenguy1

try back flushing from that fitting. there could...

try back flushing from that fitting. there could be a restriction due to tree roots or a pile up of sand and pebbles in the T or fitting before that head.
07-10-08, 03:45 AM
Replies: 3
Views: 2,837
Posted By Greenguy1

some timers have a 15 sec. delay between zones so...

some timers have a 15 sec. delay between zones so that the former valve has time to shut off, this is not normally needed if the pressure is good, but this is a feature of most Nelson timers. the...
06-19-08, 03:36 PM
Replies: 1
Views: 831
Posted By Greenguy1

comments on this HP this month

Just wondering if anyone has any comments this month about Hallowell Acadia HP's?
06-19-08, 03:15 PM
Replies: 1
Views: 1,356
Posted By Greenguy1

Welcome to my world! good luck with this, If I...

Welcome to my world! good luck with this, If I had installed the system the valves would all be in one location within 3 ft of the bac-flo. But this is not the case so look for depressions in the...
Showing results 1 to 25 of 176
 


 
Forum Jump