Search: Posts Made By: Ovenfrank
Showing results 1 to 7 of 7
Search took 0.01 seconds.
Replies: 15
Views: 12,020
Posted By Ovenfrank

dave6466: "The EOC will most definetelly be the...

dave6466: "The EOC will most definetelly be the most expensive part. I would still try a few things before taking a chance on a new EOC. Take back off stove to get at element. Use your voltmeter to...
Replies: 15
Views: 12,020
Posted By Ovenfrank

dave6466 I tried looking up your model #. It came...

dave6466 I tried looking up your model #. It came up but the last 3 digits don't match. There were 2 models that came up ending in DC4 &
DC5. Anyhow, just to give you an idea on price of EOC, you're...
Replies: 15
Views: 12,020
Posted By Ovenfrank

dave6466: "I would suspect oven sensor next. On...

dave6466: "I would suspect oven sensor next. On your stove I'm not sure what the resistance should be for that particular style. Hopefully someone else on here can answer that. If not, try an...
Replies: 15
Views: 12,020
Posted By Ovenfrank

dave6466 Bake element. Yes you can check bake...

dave6466 Bake element. Yes you can check bake element for resistance also.
Hello Dave,
Finally got to it. Elements OK.
What to do next?
Thanks,
Replies: 15
Views: 12,020
Posted By Ovenfrank

Try this, unplug the stove for a few minutes, 1...

Try this, unplug the stove for a few minutes, 1 of 2 things could happen. You may reset the stove and all will be well. Or you could get the error codes up. Then you can go from there. Good luck! ...
Replies: 15
Views: 12,020
Posted By Ovenfrank

Dave6466: "Sounds like bake element is bad....

Dave6466:
"Sounds like bake element is bad. Only sure way to tell is to take back of stove off & check for 220 volts going to element. If voltage is there, element is bad & needs replaced."
...
Replies: 15
Views: 12,020
Posted By Ovenfrank

Frigidaire electric range

This Frigidaire stainless steel range (model: CPES389AC1) is five years old (s/n:NF14705526) with a ceramic glass top.
--------------------------------------------------------------
Problem: oven...
Showing results 1 to 7 of 7


 
Forum Jump