Search: Posts Made By: Rider93hawg
Showing results 1 to 25 of 101
Search took 0.02 seconds.
Replies: 2
Views: 297
Posted By Rider93hawg

Thanks. It seems my float needle was stuck.

Thanks. It seems my float needle was stuck.
Replies: 2
Views: 297
Posted By Rider93hawg

John Deere LA135 Briggs carb question

Model# 441777-0130-B1
What's the black plastic piece called that sits above the butterfly that has 5 holes in it?
Is it prone to go bad? It won't start without starting fluid and sometimes that...
Replies: 7
Views: 487
Posted By Rider93hawg

Heat Shield?

Do I have to remove the heat shield to get to the mounting bolts?
Replies: 7
Views: 487
Posted By Rider93hawg

Thanks Cheese, I'll try your tips.

Thanks Cheese, I'll try your tips.
Replies: 7
Views: 487
Posted By Rider93hawg

Teeth are gone on the Pinion Gear-it's a spinner....

Teeth are gone on the Pinion Gear-it's a spinner. I'll remove the cover to see what I find but sure couldn't feel any bolts behind it.
Thanks for the reply.
Replies: 7
Views: 487
Posted By Rider93hawg

Removing B&S 303777 starter question

Hello,
Encore Z42 with Briggs 16HP Vanguard engine. Starter gear is toast. Do I have to remove the flywheel to get to the starter mounting bolts? It seems to be that or remove the gas tank which...
Replies: 15
Views: 514
Posted By Rider93hawg

OK, will try new wax ring because that's the only...

OK, will try new wax ring because that's the only thing left to replace on toilet. I'll let you guys know.
Thanks for all the help!
Replies: 15
Views: 514
Posted By Rider93hawg

Yes flushes multiple times with bucket. Yes,...

Yes flushes multiple times with bucket. Yes, water up to fill line in tank. Yes, it drains just not enough power to get the crap to go down. No backup or overflow. Eventually it works fine so all...
Replies: 5
Views: 574
Posted By Rider93hawg

It ended up it wasn't a corroded fuel line. ...

It ended up it wasn't a corroded fuel line. Somehow the carb jets wound up in the float bowl. I have no idea how it was running at all. Runs perfect now.
Replies: 15
Views: 514
Posted By Rider93hawg

Flapper stays up. Doesn't matter how long you...

Flapper stays up. Doesn't matter how long you hold handle. Just swirls around about 60% of the time.

Pete-did not mean for that link to be in post-no idea how that happened. I put in the septic...
Replies: 15
Views: 514
Posted By Rider93hawg

Toilet flushes sometimes-do I need to get my septic tank cleaned out?

Hello,
Toilet flushes sporadically-better on #1 than #2. I think that is a pressure problem. Here is what I have done...replaced toilet guts, poked out the hard water deposits from ALL toilet...
Replies: 5
Views: 574
Posted By Rider93hawg

Here's an update...took carb apart and cleaned...

Here's an update...took carb apart and cleaned it. After I got it put back together before putting on new fuel line I turned the key to see what would happen. It fired right up and ran. Motor...
Replies: 5
Views: 574
Posted By Rider93hawg

Thanks for the tips. Getting a new fuel line...

Thanks for the tips. Getting a new fuel line today. Yes, I did replace the fuel filter and made sure the arrow is pointing towards carb for correct flow. I am taking carb apart and cleaning while...
Replies: 5
Views: 574
Posted By Rider93hawg

John Deer LA135 no gas flow from tank to fuel filter

Hello,
Can't get John Deer LA135 22HP Briggs to run except when I prime carb.

Here is what I have done:
1. Blew gas line out to where I could see gas sloshing in tank so I know it's not clogged....
Replies: 6
Views: 2,716
Posted By Rider93hawg

Thanks for all the input. I went with some auto...

Thanks for all the input. I went with some auto super hard drying fleet urethane metal paint that the body shop supplier recommended. A quart was less than $25!
Replies: 12
Views: 693
Posted By Rider93hawg

I got tired of messing with the craftsman so I...

I got tired of messing with the craftsman so I bought a JD LA 135 100 series 22HP for $200. It hadn't ran in over a year. Two inner tubes, clean carb, runs like new.
Replies: 6
Views: 2,716
Posted By Rider93hawg

Yes, fresh water. Hull and up to water line...

Yes, fresh water. Hull and up to water line completely covered with gluv-it. That was after 100 new rivets were put in. So really no bare aluminum showing now. Do I need to use primer? Auto body...
Replies: 6
Views: 2,716
Posted By Rider93hawg

Lowe Deck Boat-what kind of paint?

Lowe deck boat aluminum. Just redid the bottom and now need to know what kind of paint to use? I know it can't contain any copper. Besides that what? The things I read about bottom paint says you...
Replies: 12
Views: 693
Posted By Rider93hawg

Flywheel key is good. Still backfires.

Flywheel key is good. Still backfires.
Replies: 12
Views: 693
Posted By Rider93hawg

Yes I made sure it was all clean before I put the...

Yes I made sure it was all clean before I put the second one in. Any ideas about the extreme backfire problem? I'm about ready to take the head off.
Replies: 12
Views: 693
Posted By Rider93hawg

I did what you told me and still backfires out...

I did what you told me and still backfires out the carb. Shoots flames. Taken me days to get flywheel off and sure enough shear pin broke. Put new one on today and broke again due to backfire. So...
Replies: 12
Views: 693
Posted By Rider93hawg

It was running then quit and has been sitting for...

It was running then quit and has been sitting for a year. I replaced the flywheel key as it got sheared. I've cleaned the carb, fresh gas, battery, etc. I spray starting fluid into carb no fire...
Replies: 12
Views: 693
Posted By Rider93hawg

Ok it seems that it needs no adjustment because...

Ok it seems that it needs no adjustment because of having hydraulic lifters. Kohler Command 15.5 HP
Any ideas about why it won't run?
Thanks again.
Replies: 12
Views: 693
Posted By Rider93hawg

Craftsman lawn tractor won't start

Hello,
Craftsman Model # 917271021 Serial #022598B008106
I got spark, fuel, air and all it does is turn over even though I got it to fire for a couple of seconds yesterday. I watched youtube about...
Showing results 1 to 25 of 101
 


 
Forum Jump