Search: Posts Made By: Geochurchi
Showing results 1 to 15 of 15
Search took 0.09 seconds.
09-06-19, 01:56 PM
Replies: 19
Views: 406
Posted By Geochurchi

Hi, itís pretty hard to tell whatís going on...

Hi, itís pretty hard to tell whatís going on there in the pics , is that cable coming in from the side feeding that motor? If it is the white from the relay will connect to whites, the black will...
Replies: 12
Views: 505
Posted By Geochurchi

Hi, I would recommend the Hyperikon bulbs, from...

Hi, I would recommend the Hyperikon bulbs, from Amazon, have approximately 20 lamps in service and no problems , I believe they feed from one end.
Geo
09-01-19, 04:27 AM
Replies: 2
Views: 165
Posted By Geochurchi

Hi, pull the fan motor out and there should be a...

Hi, pull the fan motor out and there should be a part number on it, this link appears to be what you need , but double check....
08-29-19, 12:52 PM
Replies: 13
Views: 352
Posted By Geochurchi

Hi, it wonít hurt to drop a screwdriver across...

Hi, it wonít hurt to drop a screwdriver across the terminals, probably wonít see much.
Geo
08-29-19, 10:52 AM
Replies: 13
Views: 352
Posted By Geochurchi

Hi, Big Orange should have what you need, did you...

Hi, Big Orange should have what you need, did you check in the heating isle , not in electrical.
Geo
08-26-19, 09:53 AM
Replies: 8
Views: 306
Posted By Geochurchi

Hi, I donít believe I have ever seen a SQ D...

Hi, I donít believe I have ever seen a SQ D breaker where there is a stab in connection, is there a label on the panel cover that indicates the breaker style? Can you safely take a pic of the breaker...
08-26-19, 06:14 AM
Replies: 2
Views: 201
Posted By Geochurchi

Hi, I would strip it where it enters the first...

Hi, I would strip it where it enters the first panel and run the individual conductors into the 2nd panel.
Geo
Replies: 5
Views: 402
Posted By Geochurchi

Hi, is the whole base hot all the way around? if...

Hi, is the whole base hot all the way around? if so it probably is a heat sink, hot in one place could be a problem.
Geo
Replies: 5
Views: 583
Posted By Geochurchi

Hi, probably cut the block to size, predrill a...

Hi, probably cut the block to size, predrill a couple of 5/16Ē holes ,apply some wood glue and run a couple of appropriately long lag screws through into the joist, maybe enlarge 2 holes in the box...
06-28-19, 02:43 PM
Replies: 8
Views: 1,063
Posted By Geochurchi

Hi, strapping is 1X 3 lumber or any other pieces...

Hi, strapping is 1X 3 lumber or any other pieces of lumber you have around, you should be able to use the screws you have to secure the diffuser through the drywall into the board above which could...
06-26-19, 04:20 AM
Replies: 5
Views: 432
Posted By Geochurchi

Drangd, What is the mfg.# for this GFCI with the...

Drangd, What is the mfg.# for this GFCI with the 30 ma. rating ? It would appear that these types of devices are not intended for this use, best option would be to find the problem and correct it....
06-22-19, 04:16 AM
Replies: 20
Views: 468
Posted By Geochurchi

Hi, while you are in there shut the power off to...

Hi, while you are in there shut the power off to the unit and pull the cover off that contactor and have a look at the contact points, if they are pitted replace the contactor. Cheap insurance, and...
06-17-19, 05:44 PM
Replies: 8
Views: 408
Posted By Geochurchi

Hi, how about these? ...

Hi, how about these?
https://www.gordonelectricsupply.com/index~text~ARLINGTON-F101-SCREW-MOUNT-DEVICE-BOX~path~product~part~5978716
Geo
06-17-19, 04:13 AM
Replies: 10
Views: 614
Posted By Geochurchi

I would try to find something locally , get the...

I would try to find something locally , get the exact measurements , then see if you can find it online, could prevent a lot of hassle....
06-04-19, 04:52 PM
Replies: 8
Views: 667
Posted By Geochurchi

Hi, will the fan run if the Tstat is set to fan?...

Hi, will the fan run if the Tstat is set to fan? also you can jump R to G at the Tstat to see if it runs.
Geo
Showing results 1 to 15 of 15


 
Forum Jump