Search: Posts Made By: pcboss
Showing results 1 to 13 of 13
Search took 0.24 seconds.
09-15-19, 10:25 PM
Replies: 10
Views: 253
Posted By pcboss

In order to use the reduced depth of 12 inches...

In order to use the reduced depth of 12 inches the circuit is limited to 120 volts and a 20 amp maximum.
09-10-19, 05:30 PM
Replies: 5
Views: 197
Posted By pcboss

NM cannot be run where subject to physical damage...

NM cannot be run where subject to physical damage without protection. The issue is that is very subjective and some would allow that while others would not.
09-08-19, 05:19 PM
Replies: 3
Views: 195
Posted By pcboss

Large blue or grey wire nuts can be used for 2...

Large blue or grey wire nuts can be used for 2 #6's.
09-08-19, 05:20 AM
Replies: 9
Views: 211
Posted By pcboss

You do not have travellers like a 3 way switch....

You do not have travellers like a 3 way switch. You have power in, power out and the switched hot. Unless the cable going to the receptacle is in the same box as the constant hot you will need to...
09-03-19, 07:09 PM
Replies: 9
Views: 242
Posted By pcboss

The hack has created a shock hazard and possibly...

The hack has created a shock hazard and possibly worse. This will now place current on any metal parts of the system. This is in no way normal. If it is normal someone needs to be taught a lesson in...
08-30-19, 08:08 PM
Replies: 6
Views: 216
Posted By pcboss

Have you checked to see if the power company will...

Have you checked to see if the power company will allow the meter to be moved? You also need to see if they allow connections out of the back of the socket.
08-28-19, 03:44 PM
Replies: 6
Views: 281
Posted By pcboss

The feed to the inside panel is SER, not SEU. ...

The feed to the inside panel is SER, not SEU.

I do not see a dedicated ground bar.
08-21-19, 05:29 PM
Replies: 2
Views: 237
Posted By pcboss

There is no need for the second gfi to be wired...

There is no need for the second gfi to be wired from the load side of the first gfi. Just switch the wires to the line side of both and the gfi function will not affect the other
08-18-19, 02:05 AM
Replies: 5
Views: 328
Posted By pcboss

Straight 240v equipment does not need a neutral. ...

Straight 240v equipment does not need a neutral. Just 2 hots and a ground.
06-23-19, 03:49 PM
Replies: 7
Views: 411
Posted By pcboss

The dishwasher and disposal should not be on the...

The dishwasher and disposal should not be on the same circuit as the small appliance countertop circuits.

They might be able to share a circuit between the disposal and DW.
06-10-19, 01:49 AM
Replies: 8
Views: 549
Posted By pcboss

You only need one ground per conduit. ...

You only need one ground per conduit.

Another conductor can be pulled into the conduit.
06-09-19, 04:43 AM
Replies: 8
Views: 549
Posted By pcboss

You do not connect the grounds to a c!amp screw..

You do not connect the grounds to a c!amp screw..
05-10-19, 03:30 PM
Replies: 18
Views: 483
Posted By pcboss

The.meter.or combo service.equipment will need to...

The.meter.or combo service.equipment will need to be on the power company approved list.
Showing results 1 to 13 of 13


 
Forum Jump