Search: Posts Made By: keystart
Showing results 1 to 25 of 29
Search took 0.00 seconds.
Replies: 48
Views: 54,834
Posted By keystart

the oil doesnt really have a gas smell just an...

the oil doesnt really have a gas smell just an irregular smell and its only the oil in the valve case not in the tank that smells
Replies: 48
Views: 54,834
Posted By keystart

i talked so someone and they said its normal for...

i talked so someone and they said its normal for white smoke to comeout at start up
Replies: 48
Views: 54,834
Posted By keystart

that kind1383 with another peice with 2 whires...

that kind1383 with another peice with 2 whires black and white going into it
Replies: 48
Views: 54,834
Posted By keystart

i inspected the carb neetle but it seems ok what...

i inspected the carb neetle but it seems ok what next?
Replies: 48
Views: 54,834
Posted By keystart

while testing voltage i found these: two plugs...

while testing voltage i found these: two plugs that cant plug into another and one compleatley severed wire:eek: the wires are yellow with red plugs
Replies: 48
Views: 54,834
Posted By keystart

yes in fact it does have a sort of irregular...

yes in fact it does have a sort of irregular gasey smell what does this mean?
Replies: 48
Views: 54,834
Posted By keystart

new prooblem has just arose when it starts it...

new prooblem has just arose when it starts it bellows white smoke for about a minute or so dont know if its anything to be concerned about:confused:
Replies: 48
Views: 54,834
Posted By keystart

r u supposed to get any voltage readings at the...

r u supposed to get any voltage readings at the soulinoid?
Replies: 48
Views: 54,834
Posted By keystart

i have looked for voltage problems by hooking up...

i have looked for voltage problems by hooking up a multimeter to my battery and it showed no drop i finally looked at your link because my cpu wasnt cooperating and it told me that i need to hook the...
Replies: 48
Views: 54,834
Posted By keystart

then why would i need to adjust it that tight for...

then why would i need to adjust it that tight for the compression to release properly:confused:
Replies: 48
Views: 54,834
Posted By keystart

o ok will it be ok to leave it how it is for a...

o ok will it be ok to leave it how it is for a few weeks until i get a camshaft?
Replies: 48
Views: 54,834
Posted By keystart

what do you mean by "burning the...

what do you mean by "burning the valve":confused:
Replies: 48
Views: 54,834
Posted By keystart

ok thankyou ill wait and see how it does ill be...

ok thankyou ill wait and see how it does ill be getting a new camshaft soon so it should be ok till then:D
Replies: 48
Views: 54,834
Posted By keystart

i think its less than 1 or 0 but it runs well so...

i think its less than 1 or 0 but it runs well so willit be ok?
Replies: 48
Views: 54,834
Posted By keystart

thanks i tightened the exaust a little and eased...

thanks i tightened the exaust a little and eased off the intake and it started right up the intake valve is way tighter than .003 so do i still need a new cam or is it good???
Replies: 48
Views: 54,834
Posted By keystart

i see the hop but when i tightened the intake all...

i see the hop but when i tightened the intake all the way down to nothing it wouldnt start it just spinns like it is going to but never does
Replies: 48
Views: 54,834
Posted By keystart

i tightend the intake valve sooo far that it had...

i tightend the intake valve sooo far that it had no compression and it diddnt start it just spun freeley:wall:
Replies: 48
Views: 54,834
Posted By keystart

if the engine needed taken apart what would need...

if the engine needed taken apart what would need fixed???
Showing results 1 to 25 of 29
 


 
Forum Jump