Search: Posts Made By: michaeljp86
Showing results 1 to 25 of 200
Search took 0.03 seconds.
Replies: 21
Views: 38,129
Posted By michaeljp86

I had some brazing rod that work great but after...

I had some brazing rod that work great but after a while it would just fall off. It seemed like you had to get the aluminum to the perfect temp which was right before it melted off.

I bought a...
01-25-12, 09:48 PM
Replies: 3
Views: 1,559
Posted By michaeljp86

Looks like mcmaster has what Im looking for....

Looks like mcmaster has what Im looking for. Tomorrow Ill got do some figuring but best I can tell they have something that will work. thanks for the help
01-25-12, 04:10 PM
Replies: 12
Views: 6,902
Posted By michaeljp86

It may not have a filter but maybe there is a...

It may not have a filter but maybe there is a pickup screen on the end of the tube. Im not familiar with that tractor so I cant be of much help.
Replies: 8
Views: 14,420
Posted By michaeljp86

Me and my dad had to do the same thing to his...

Me and my dad had to do the same thing to his dads travelmaster. I think it was built in 1975. It was alot of work. The roof was ok but the floor rotted out. We peeled up the aluminum on the sides...
01-25-12, 01:46 PM
Replies: 12
Views: 6,902
Posted By michaeljp86

If you have water in your fluid and it freezes...

If you have water in your fluid and it freezes you can have all kinds of problems.
Replies: 4
Views: 6,402
Posted By michaeljp86

Follow the fuel like from the tank and crack it...

Follow the fuel like from the tank and crack it loose at the injection pump. If fuel is there then crack a line loose at the injector and turn it over. If you have fuel to the injection pump and none...
01-25-12, 01:18 PM
Replies: 3
Views: 1,559
Posted By michaeljp86

Where can I get this rubber trim?

Id like to reupholsterthis seat and I was wondering where I could find the rubber trim around the edge of the seat. Im sure I could find some black vinyl but I dont where there to get the rubber...
Replies: 19
Views: 6,649
Posted By michaeljp86

Nothing, checked spark and nothing

Nothing, checked spark and nothing
Replies: 19
Views: 6,649
Posted By michaeljp86

I just did this, I had one finger on the end of...

I just did this, I had one finger on the end of the plug wire and another finger on the engine. I moved the flywheel back and forth as fast as I could. I felt a little tingle but not much.
Replies: 19
Views: 6,649
Posted By michaeljp86

Heres a picture, you can see the allen wrench...

Heres a picture, you can see the allen wrench stuck on the magnet. Im starting to wonder if the new coil is bad.

I had the same problem on a VG4D wisconsin and a electrical place that rebuilds...
Replies: 19
Views: 6,649
Posted By michaeljp86

The magnets seem strong enough to me. I stuck the...

The magnets seem strong enough to me. I stuck the allen wrench on them and they stick together pretty well. Im at a loss with this. Maybe Ill send some pictures.

Buying a bad coil doesnt surprise...
Replies: 19
Views: 6,649
Posted By michaeljp86

I bought a brand new coil for these saws and...

I bought a brand new coil for these saws and still no spark, could the magnet in the flywheel be weak? The new one does the same thing.
Replies: 19
Views: 6,649
Posted By michaeljp86

They are the 2 stroke concrete saws. They are all...

They are the 2 stroke concrete saws. They are all Partner K700. If I hold the end of the sparkplug wire and touch the engine I can feel a little electrcity.
Replies: 19
Views: 6,649
Posted By michaeljp86

Well I cleaned everything down to bare metal so...

Well I cleaned everything down to bare metal so its grounded good and it didnt change a thing. I tried all 3 and they all do the same.
Replies: 19
Views: 6,649
Posted By michaeljp86

I'll clean everything up tomorrow, I couldnt find...

I'll clean everything up tomorrow, I couldnt find the other coil. Ill find it tomorrow and try all 3. Maybe try another saw.
Replies: 19
Views: 6,649
Posted By michaeljp86

I checked it out today, the sparkplug doesnt make...

I checked it out today, the sparkplug doesnt make a difference. It does make electricity just not enough to make a spark. I take it that means the coil is junk? I put on a different coil off another...
Replies: 19
Views: 6,649
Posted By michaeljp86

I didnt get a chance to check it today, Ive been...

I didnt get a chance to check it today, Ive been playing around in a septic tank for 2 days. I should have some time tomorrow.
Replies: 6
Views: 7,415
Posted By michaeljp86

Ive got a gas pressure washer and the pump in...

Ive got a gas pressure washer and the pump in mounted directly to the engine.
Replies: 19
Views: 6,649
Posted By michaeljp86

Would a plug have a problem that would cause...

Would a plug have a problem that would cause this? Im not sure if I tried another plug the first time but Ill try it tomorrow.
Replies: 19
Views: 6,649
Posted By michaeljp86

Angry No spark again

I have 3 partner concrete saws I bought not running. My plan was to fix them and sell 2 and keep one. Anyways about a year ago when I bought them I couldnt get spark on any of them. Sometimes it...
Replies: 6
Views: 7,415
Posted By michaeljp86

I agree, it would have to be the seals between...

I agree, it would have to be the seals between the pump and engine on the crank shaft.
Replies: 21
Views: 38,129
Posted By michaeljp86

I used my brazing rod the other day and it seems...

I used my brazing rod the other day and it seems to have worked good so far. I used it on a cast aluminum door handle on a 1992 chevy truck. I dont remember the brand of mine but its in rods and you...
12-31-09, 05:16 PM
Replies: 3
Views: 1,087
Posted By michaeljp86

I got the motor to work, I sprayed some PB on it...

I got the motor to work, I sprayed some PB on it and put a socket wrench on it. It seems to work good now. It just keeps running though. I guess heat shuts it off and since theres no gas theres no...
12-31-09, 11:29 AM
Replies: 3
Views: 1,087
Posted By michaeljp86

Gas dryer help

I have a gas dryer and when I push the start button it just makes a buzz sound like the motor is stuck and it wont spin. I dont have gas hooked up to it, I dont know if that would cause this or not....
12-31-09, 11:21 AM
Replies: 3
Views: 1,882
Posted By michaeljp86

Sharp is right, the oven shouldnt be on a GFI. ...

Sharp is right, the oven shouldnt be on a GFI.

Did these problems you had with the clean light happen when it wasnt plugged into the GFI? There could be a problem with the oven and thats why the...
Showing results 1 to 25 of 200
 


 
Forum Jump