Search: Posts Made By: NAVYDAD
Showing results 1 to 25 of 81
Search took 0.01 seconds.
Replies: 2
Views: 1,368
Posted By NAVYDAD

I can't make out the model # on the trimmer ,But...

I can't make out the model # on the trimmer ,But the trimmer is a TROYBILT 4 CYCLE 26.2 CC also I was wandering where I can get parts for this trimmer since the flex shaft connected to the motor ide...
Replies: 2
Views: 1,368
Posted By NAVYDAD

Sears 4 cycle weedwacker

I just needed some info on how to adjust the carbs on these types of Trimmers.I noticed that it does not have the same adjustments as the 2 CYCLES do.
:confused::help:Thank You
Replies: 12
Views: 2,899
Posted By NAVYDAD

Question ok , I finally had some time to mess with the...

ok , I finally had some time to mess with the generator,And I turned on the engine and found out I have 12.5 volts coming out of the socket.Not enough to turn anything on .I also found it does have...
Replies: 20
Views: 16,915
Posted By NAVYDAD

Well , I finally had a personal mechanic look at...

Well , I finally had a personal mechanic look at it and it turn out to be the lower intake gaskets and the vaccum connection on the top of the engine was loose as well as replacing the back spark...
Replies: 20
Views: 16,915
Posted By NAVYDAD

jdjohn84,Iam still having the same problem,I...

jdjohn84,Iam still having the same problem,I replaced all the of upper gaskets and now Iam checking on the part where the hose(small) connects on the top of the engine. I am thinking that it might...
Replies: 20
Views: 16,915
Posted By NAVYDAD

Dirtsnowman,If You don't mind I would like to...

Dirtsnowman,If You don't mind I would like to have those copies if all possible.I leave in Corpus Christi ,Tx You can contact me at [email protected] Let Me know how I can contact You.:thumbup:...
Replies: 12
Views: 2,899
Posted By NAVYDAD

liljman,Tell Me what info You need and i'll look...

liljman,Tell Me what info You need and i'll look for it on the generator and Yes it is a portable generator with a kohler engine.Also thank Gunguy45 for the help
Replies: 20
Views: 16,915
Posted By NAVYDAD

thanks Gunguy45, I'll try it out,I have the plugs...

thanks Gunguy45, I'll try it out,I have the plugs ,It is hard to get to the ones in the back and your right it hard You have to remove the intake .I hope it solves my growing headache with this...
Replies: 12
Views: 2,899
Posted By NAVYDAD

speedwrench ,Do I open the housing where the...

speedwrench ,Do I open the housing where the coils are at to get to the brushes?The heart of the generator?Can I unbolt it and remove the guts out to expose the brushes?:confused:
Replies: 20
Views: 16,915
Posted By NAVYDAD

Dirtsnowman, can you tell me if and where I can...

Dirtsnowman, can you tell me if and where I can find a repair manual for this SUV.The suv is great it just this annoying problem in the mornings and after it been sitting for awhile. You are right it...
Replies: 12
Views: 2,899
Posted By NAVYDAD

Question speeedwrench, I'll try the voltmeter and see what...

speeedwrench, I'll try the voltmeter and see what I get off it .and also flirty1 the drill does work I tried it on a house socket.it has a trip switch and other breaker attachments.Do you know where...
Replies: 20
Views: 16,915
Posted By NAVYDAD

Hi Dirtsnowman,it is a v6 and you're right it...

Hi Dirtsnowman,it is a v6 and you're right it hesitates real bad when it been parked for awhile and after being running and or driving it for 10 min . or less it calms down.Do you what I can look...
Replies: 12
Views: 2,899
Posted By NAVYDAD

liljman,Here is the model info ONAN K2200...

liljman,Here is the model info ONAN K2200 MODEL=2.2KM-1P/1B POWER EXPRESS pelase help:help:
Replies: 20
Views: 16,915
Posted By NAVYDAD

Question speedwrench,I'll try to get to it this weekend...

speedwrench,I'll try to get to it this weekend .It will be a task cause the vavle cover is right above it .it sits under this and a short piece of hose connects to it and there after a series of...
Replies: 20
Views: 16,915
Posted By NAVYDAD

ecman51`,do you know where I can find a manual...

ecman51`,do you know where I can find a manual for my escape?
Replies: 12
Views: 2,899
Posted By NAVYDAD

Post liljman,I'LL get it for you I'm sorry about that,...

liljman,I'LL get it for you I'm sorry about that, it's that I really want to make this work if I can,I'll post back with the info.
Replies: 12
Views: 2,899
Posted By NAVYDAD

onan generator no output

can anyone tell me where or what to look for. the engine runs good and I have tried the flash field test and nothing happens. I feel current on the drill that I have connected ,but it seems that it...
Replies: 20
Views: 16,915
Posted By NAVYDAD

2001 ford escape early start problems

I recently been having problems with my Escape ,It's been good but for some reason in the mornings and after it been parked for awhile it acts like it wants to turn off like it is not getting fuel....
Replies: 3
Views: 1,423
Posted By NAVYDAD

Thanks pyroman/cheese for your info, But I will...

Thanks pyroman/cheese for your info, But I will try this flash fields test and see if it works.it has breakers /reset button on front panel .should I leave this items alone and hope that it will...
Replies: 3
Views: 1,423
Posted By NAVYDAD

Lightbulb generator no output

Hello ,I got this generator from a neigbor who was moving out and he gave me a generator that he got from a friend but never mess with it.The engine starts and runs good ,But I have no output on the...
Replies: 3
Views: 1,293
Posted By NAVYDAD

Thanks speedwrench, for the info and I'll give it...

Thanks speedwrench, for the info and I'll give it a try. Sorry about posting this on a different forum
Replies: 8
Views: 1,481
Posted By NAVYDAD

Thumbs up Thanks cheese ,for Your info.The mower doees not...

Thanks cheese ,for Your info.The mower doees not smoke when running ,Just at shutting off and it is not alot.I check the breather to see what You meant on being stuck. It has a little resistance on...
Replies: 3
Views: 1,293
Posted By NAVYDAD

Wink window replacements

Is it hard to replace windows on a wood frame house ,As I am planning to attempt to do it myself. I have old windows and I am wanting to replace them with doublepane windows.What is involved.
Replies: 8
Views: 1,481
Posted By NAVYDAD

Cool Thanks cheese,it is an old mower that my inlaw...

Thanks cheese,it is an old mower that my inlaw gave to me for me to tinkle with it .I got it started and running pretty good but after I shut it off it got what looks like exhaust smoke .I guess...
Replies: 8
Views: 1,481
Posted By NAVYDAD

Question cheese ,is there a remedy for this problem. Do I...

cheese ,is there a remedy for this problem. Do I have to change the rings.
Showing results 1 to 25 of 81
 


 
Forum Jump