Search: Posts Made By: skeeter_ca
Showing results 1 to 25 of 200
Search took 0.02 seconds.
11-08-19, 07:59 AM
Replies: 10
Views: 312
Posted By skeeter_ca

leave a gap if going with foam board skeeter

leave a gap if going with foam board

skeeter
10-11-19, 03:43 PM
Replies: 7
Views: 500
Posted By skeeter_ca

"And he guaranteed my condensation would be gone...

"And he guaranteed my condensation would be gone forever"

Tell him you will have him do it if he puts that in writing on the invoice? lol

skeeter
10-11-19, 03:21 PM
Replies: 5
Views: 571
Posted By skeeter_ca

You could put some craft backed fiberglass...

You could put some craft backed fiberglass insulation there but you do not want to compress it or it will loose it's insulation value. You could peel off some of the fiberglass so it is thinner but...
10-11-19, 02:11 PM
Replies: 6
Views: 1,476
Posted By skeeter_ca

I believe, but someone correct me if I am wrong,...

I believe, but someone correct me if I am wrong, that you can get condensation on the ducting that is uninsulated, even in sunny California. Picture this...warm humid day outside, hot humid attic,...
10-11-19, 01:32 PM
Replies: 4
Views: 253
Posted By skeeter_ca

Spray foam on the inside of the roof can be one...

Spray foam on the inside of the roof can be one of the best ways to insulate a home, also the most expensive. But you have to know what you are doing. A lot to consider. I have been researching...
Replies: 3
Views: 215
Posted By skeeter_ca

Thanks, I saw another reference and it said 3150....

Thanks, I saw another reference and it said 3150. So i'll set it around there.

Again thanks.

skeeter
Replies: 3
Views: 215
Posted By skeeter_ca

What rpm for YTD mower?

I have a YTD lawn mower, model #11A-549p713. The rpm is low and not sure what to set it at. I feel it can over rev if I set it too high and it has some kind of idle control that varies the rpm but it...
05-14-19, 05:10 PM
Replies: 17
Views: 595
Posted By skeeter_ca

That would mean you can't go to sleep unit 11pm....

That would mean you can't go to sleep unit 11pm. Or get up at 11 and plug it in. Or forget to get up and plug it in then you have a low battery the next morning. Sounds like a big inconvenience to...
01-30-19, 09:46 AM
Replies: 14
Views: 405
Posted By skeeter_ca

Interesting.... guess when I get to that point I...

Interesting.... guess when I get to that point I will verify with the manufacturer the correct wiring procedure. Thank you

skeeter
01-27-19, 04:18 PM
Replies: 14
Views: 405
Posted By skeeter_ca

Think you might be right. Why have different...

Think you might be right. Why have different adapters to fit. Just change what ever equipment cord end to match the 14-50 receptacle. Not like I am going to have a dozen pieces of equipment to run.
...
01-25-19, 09:28 PM
Replies: 14
Views: 405
Posted By skeeter_ca

So why wouldn't it be ok to have the best safest...

So why wouldn't it be ok to have the best safest receptacle and use adapters to bump down to the different types of 3 prong outlets?


skeeter
01-25-19, 09:25 PM
Replies: 14
Views: 405
Posted By skeeter_ca

The 14-50R seems to be the newest style plug that...

The 14-50R seems to be the newest style plug that includes a ground for an added safety factor, otherwise the same as the 3 prong.

skeeter
01-25-19, 09:21 PM
Replies: 14
Views: 405
Posted By skeeter_ca

My Lincoln 100amp DC welder, 20% duty cycle uses...

My Lincoln 100amp DC welder, 20% duty cycle uses 120v 20a plug. But 240v welders use several types of plugs, the most commonly the 10-50 or 10-30.


skeeter
01-25-19, 08:14 PM
Replies: 14
Views: 405
Posted By skeeter_ca

Ok, am I missing something here? A normal 4 prong...

Ok, am I missing something here? A normal 4 prong 240v 50a 14-50 socket is essentially only protected by a 2P50a breaker. Not a 100a breaker? Am I thinking this wrong?

skeeter
01-25-19, 06:49 PM
Replies: 14
Views: 405
Posted By skeeter_ca

PJmax, I respect your knowledge on this site...

PJmax,
I respect your knowledge on this site but 50a RV campsites use the 14-50R outlet. It provides 50amps on each 120v leg. When using an adapter for 30a campers it uses only one leg for the 120v...
01-25-19, 06:24 PM
Replies: 14
Views: 405
Posted By skeeter_ca

Do all, Be all, 240v outlet?

I am installing a 240v outlet in my garage. I want this outlet to be multi functional. I want it to run my current 100a 120v Welder and be ready for me upgrading to a bigger 240v welder when I want...
08-19-18, 09:00 PM
Replies: 8
Views: 576
Posted By skeeter_ca

The home depot staff werent really sure what to...

The home depot staff werent really sure what to do. A new shipment of the tile came in and it is the same way. Guess i should try and contact the manufacturer.
skeeter
08-18-18, 10:32 AM
Replies: 8
Views: 576
Posted By skeeter_ca

Ok here are some close ups of the plastic stuff...

Ok here are some close ups of the plastic stuff on the back it breaks off easily but not like it was meant to peel off. It is not water soluble.


skeeter
08-15-18, 12:18 PM
Replies: 8
Views: 576
Posted By skeeter_ca

Dag namit, forgot to get a better picture. It has...

Dag namit, forgot to get a better picture. It has a white background under the stuff. And the stuff is just flaking and peeling off. I'll see if i can get a better picture of it tonight.

skeeter
08-13-18, 01:47 PM
Replies: 8
Views: 576
Posted By skeeter_ca

No it is not sticky. It peels off and breaks into...

No it is not sticky. It peels off and breaks into pieces like a thin sheet of plastic. Really weird. I'll get another pic tonight of it peeling back.

skeeter
08-13-18, 12:32 PM
Replies: 8
Views: 576
Posted By skeeter_ca

Tile backing weird?

Hello,
Picked up some glass tile from Home Depot for my shower. The back of the tile has a loose plastic glue sheet on the back. Is this some kind of protective cover that needs to be removed before...
08-09-18, 01:12 PM
Replies: 4
Views: 318
Posted By skeeter_ca

Sorry meant rafters skeeter

Sorry meant rafters

skeeter
08-09-18, 01:06 PM
Replies: 4
Views: 318
Posted By skeeter_ca

The first pic shows the old cables running on top...

The first pic shows the old cables running on top of the rafters and the second pic shows where I want to run the new circuits to the attic.

skeeter
08-09-18, 01:00 PM
Replies: 4
Views: 318
Posted By skeeter_ca

Circuit runs through garage?

I am running new circuit runs for remodeling my bathrooms. Originally all the electrical circuit runs from the main panel go up over the roof trusses between the slats that the original shake shingle...
08-01-18, 01:22 PM
Replies: 5
Views: 508
Posted By skeeter_ca

I would use one of these...... ...

I would use one of these......

https://www.oreillyauto.com/flux-capacitor

hehe
Showing results 1 to 25 of 200
 


 
Forum Jump