Search: Posts Made By: TN DIY
Showing results 1 to 25 of 29
Search took 0.01 seconds.
Replies: 1
Views: 1,018
Posted By TN DIY

Look at page 35, BEWARE YOU WILL HAVE TO...

Look at page 35, BEWARE YOU WILL HAVE TO REPROGRAM ENTIRE PANEL

www.linearcorp.com/pdf/manuals/DUAL-824.pdf. Hope it helps.
Replies: 4
Views: 1,010
Posted By TN DIY

Make sure the contact is working, I've had it...

Make sure the contact is working, I've had it when the contact is not working so the interior zone is now instant instead of delay.
Replies: 3
Views: 3,491
Posted By TN DIY

You can purchase a magnet from fro Radio Shack or...

You can purchase a magnet from fro Radio Shack or any place that sells alarm equipment. There are many places that sell equipment online. I assume that it is the magnet that is missing from the door...
Replies: 3
Views: 2,826
Posted By TN DIY

Try doing a command 40, note which lights come...

Try doing a command 40, note which lights come on. hit enter, and repeat. Tell me which lights come on may tell us what's wrong.
Replies: 17
Views: 2,421
Posted By TN DIY

I would take the contact wires off the...

I would take the contact wires off the transmitter and ohm it out. Try tapping on the contact and see if it fluctuates, could be a bad contact or window has to much play in it.
Replies: 9
Views: 1,637
Posted By TN DIY

I'm partial to Linear products

I'm partial to Linear products
Replies: 2
Views: 5,446
Posted By TN DIY

http://www.duplexplusz.hu/file/236.pdf...

http://www.duplexplusz.hu/file/236.pdf installation manual
Replies: 2
Views: 5,446
Posted By TN DIY

Try this. FACTORY SETTINGS DEFAULT VALUES ...

Try this.

FACTORY SETTINGS
DEFAULT VALUES
The default programming of the SYSTEM 236 will allow you to use it as
a local panel without any additional programming. The actual default
programming...
Replies: 13
Views: 8,615
Posted By TN DIY

If you open the door in question does the ready...

If you open the door in question does the ready light go out, no, might be the door contact not opening up.
Replies: 11
Views: 4,683
Posted By TN DIY

dbraun Same for 2000 panels as 1500 panels, you...

dbraun Same for 2000 panels as 1500 panels, you can't change from pulse to DTMF
Replies: 11
Views: 4,683
Posted By TN DIY

Being a ex HW service tech, I can tell you that...

Being a ex HW service tech, I can tell you that you can not change the 1500e from pulse to DTMF dialing.
Replies: 4
Views: 16,003
Posted By TN DIY

Did you find a model #. I used to work for...

Did you find a model #. I used to work for Honeywell. might be able to help you
Replies: 4
Views: 1,546
Posted By TN DIY

what kind of panel? take volt meter and check for...

what kind of panel? take volt meter and check for 12vdc between red and black, if you do that is power and yellow and green are likely to be loop
Replies: 2
Views: 3,500
Posted By TN DIY

are the contacts home run to panel? remember...

are the contacts home run to panel? remember example zn 1 may not be loop a etc. Do you have a basement or attic? the wiring might be right under or over the old window area.
Replies: 3
Views: 818
Posted By TN DIY

rats?

I wonder if you might have something enviromental, like possibly sun hitting something shiny or warming something up in am, if it were rats they trip it in the middle of the night too. I had a...
Replies: 3
Views: 4,009
Posted By TN DIY

dry contact

Dry contact refers to a contact of a relay which does not make or break a current. Usually some other relay or device has the job of starting or stopping the current. For example, a reed relay matrix...
Replies: 8
Views: 9,966
Posted By TN DIY

key

When i was a tech ihad extra keys to hand out to residentil owners so they could help me troubleshoot the problem over the phone. You can walk or talk.Beer 4U2
Replies: 8
Views: 9,966
Posted By TN DIY

key

it is a 1393 key and tech's usually have a dime a dozen. most companies will send one.
Replies: 4
Views: 851
Posted By TN DIY

xtra wires

we used it for a a pull if we needed to add later
Replies: 8
Views: 3,321
Posted By TN DIY

6160 is compatiable for vista 20p

6160 is compatiable for vista 20p
Replies: 4
Views: 878
Posted By TN DIY

Do you have any batteries plus stores?

Do you have any batteries plus stores?
Replies: 1
Views: 862
Posted By TN DIY

There is a time delay between transmitting a...

There is a time delay between transmitting a wireless signal to control to save on battery life
Replies: 2
Views: 1,341
Posted By TN DIY

How Do I ... Wire an RJ31X Jack? This page...

How Do I ... Wire an RJ31X Jack?
This page explains the strange little RJ31X wall-jack. What it's for. What it does. And how to hook one up properly.
Background
Wiring in the Leviton RJ31X Jack ...
Replies: 8
Views: 1,425
Posted By TN DIY

Did you try to use just the E.O.L. in the panel?...

Did you try to use just the E.O.L. in the panel? If that clears zone problem, check loop resistance and any shorts to ground or foreign voltage on the loop.
Replies: 1
Views: 879
Posted By TN DIY

I would recommend you use at least a 3/8 inch...

I would recommend you use at least a 3/8 inch contact and mount the contact on open side of the door or jamb. On the steel door you will need a contact that is for steel doors or use a plunger type...
Showing results 1 to 25 of 29
 


 
Forum Jump