Search: Posts Made By: bighammer
Showing results 1 to 25 of 44
Search took 0.02 seconds.
Replies: 8
Views: 7,534
Posted By bighammer

rear wiper not woking

it was a simple fix had a blown fuse thanks for all the help big hammer:)
Replies: 5
Views: 2,851
Posted By bighammer

Question flexible gas line for natural gas

what is the rule of thumb for putting flexible gas line threw a stone foundation I am going to run a gas line from the basement to my patio for a vent less or vented gas heater my ? is can I just run...
Replies: 8
Views: 7,534
Posted By bighammer

rear wiper not working

thanks for the info. I will try all the suggestions and will try the web site for the owners manual thanks again big hammer
Replies: 11
Views: 925
Posted By bighammer

crack in brick wall

to all indications you have an settlement problem if you want to fix the cosmetic problem for looks is an easy fix by have a brick contractor tuck point up the brick or for more expensive rout to go...
Replies: 8
Views: 7,534
Posted By bighammer

Unhappy Rear windshield wiper not working

I have a 2004 gmc envoy xuv the rear wiper quit working, I don't have an owners manual to check it out to she what is going on with it any help will be appreciated, oh one more thing where can I find...
Replies: 2
Views: 524
Posted By bighammer

car manuel

I recently purchage a 2004 gmc xuv with a retractable roof , i would like to get an own ers manuel for this suv didnt get one with the , the previous don't know what happened to it need some help...
Replies: 9
Views: 1,342
Posted By bighammer

what i usually do when i am tuck pionting , is...

what i usually do when i am tuck pionting , is 1/4 inch wide dimond grindingtool in my grinder grind joints out about 3/8 of an inch, clean out real good, use a concret binder that can be painted on...
02-09-14, 11:45 AM
Replies: 1
Views: 607
Posted By bighammer

fan blower combo

i am going to move a light. exhoust fanand a vent blower, what to dowith the wires after i remove the swith is useing small wire nuts and tape them real good, i can get the wire from the fan combo...
Replies: 1
Views: 751
Posted By bighammer

replacement of patio roof

I am going to replace the roof on my patio , I have salvage ledge roofing on it now, but relacing it every 5 or 6 years iI was wondering what would be the best to use a rubber roofing or a metal roof...
Replies: 8
Views: 1,056
Posted By bighammer

cracks in driveway

First of all all of the products are good that above mention ed, i do 2 things (1) clean the cracks real and remove all depre and fill with a backer rod can get all different sizes at your local...
Replies: 4
Views: 671
Posted By bighammer

Lights not working

They are hardwired in and not flouesent
Replies: 4
Views: 671
Posted By bighammer

Lightbulb lights not working in clothes closets

my light in my closets not working they were working fine but one light started to flicker and then came back on and thew light just quite working all together and now both don't work replaced both...
Replies: 2
Views: 1,353
Posted By bighammer

motor chipping

i would use a electric grinder with a dimond blade 3/8 wide and cut out the weep hole:dogrun:
Replies: 5
Views: 7,745
Posted By bighammer

corners

first i would repace the rot around the door, then clean out loose concret clean real well with the dep hole i would use brick to bring to even with the rest of foundation, i would use portland...
Replies: 18
Views: 87,623
Posted By bighammer

cultured stone

Don't do it, useing an adhevsive, i repair a job that a carpenter did with adhevsive on a fire place created a bad smell , i would use a spect mix with a shovel of portland added gives a real good...
Replies: 10
Views: 1,959
Posted By bighammer

shrinkage cracks

to me they look like settleing cracks and don't think it is a big deal, if you want tyo fix them all you have to do is v out the cracks about an inch deep and get 1/4 inch backer rod stuff into crack...
Replies: 2
Views: 669
Posted By bighammer

starting

My 12 1/2 hp. Briggs ans straton will only start by jumpping the celenoid, replaced ignition switch, and celenoid any help will be appreciated
Replies: 7
Views: 9,924
Posted By bighammer

ement board or metal

i all ways used the metal lath 2.5 light weight, never had a problem, yes the right way to hang metal lath is cups up, and i don;t think it really hurts if you hang metal upside down, and belive me i...
Replies: 23
Views: 18,015
Posted By bighammer

mixtures

im would sugest try siftingg the sand portland i do this all the time with no problem the 3 ti 1 mix is good :wall:
08-10-12, 09:17 AM
Replies: 4
Views: 1,047
Posted By bighammer

wiring breaker box

i am installinga new dish washer and microwave with an exhoust hgood, what i need to know is what size wire should i use for the dish washer and the microwave, and also a 20 amp 0r 15 amp for the...
07-19-12, 01:00 PM
Replies: 2
Views: 916
Posted By bighammer

newe air conditioner cord to short

put in a new air conditioner and the cord is to short and there is 220 going to the air cond. so i made an extention cord out of the old air cond. cut the cord of and got the right plug in , was...
Replies: 2
Views: 1,118
Posted By bighammer

stuccoing

fist i would put put roofing paper on after the siding is remove, and the other thing is i sheet of metal lath is 27 inches wide and 96 inches long , nees to no what the square footage is are you...
Replies: 4
Views: 2,189
Posted By bighammer

block repair

by looking at your pictures what i would do is dig down on the outside of the foundation find where there is a crack or something else that is leaking in water if you find a place clean the wall real...
Replies: 7
Views: 11,660
Posted By bighammer

repair to chimmey crown

as for all of the other post i agree with them , but i would add some dura bond wire to the concret and i would use a gravel mix add a shovel of portland cement and i would also paint the exposed...
Replies: 9
Views: 39,050
Posted By bighammer

concrete over

in my 40 plus years of masonary work and flat work never heard of putting concrete over asphalt always the other way i would take out the concrete that is just my opinion :confused:
Showing results 1 to 25 of 44
 


 
Forum Jump