Search: Posts Made By: thrasher
Showing results 1 to 17 of 17
Search took 0.01 seconds.
Replies: 2
Views: 3,399
Posted By thrasher

It's the stuff that snaps together down it's...

It's the stuff that snaps together down it's length and has a crimp on one end. Is it dangerous?
Replies: 2
Views: 3,399
Posted By thrasher

Galvanized pipe ok for furnace flue?

I know that the black flue pipe is normaly used for wood stoves but is gavalanized pipe ok for gas furnace?
Replies: 9
Views: 1,756
Posted By thrasher

It's working great now. I remounted lower in the...

It's working great now. I remounted lower in the engine compartment and put teflon tape on inlet, outlet, and to carburator connections. I have a larger plastic see thru gas filter which sits a...
Replies: 9
Views: 1,756
Posted By thrasher

Thanks Mike, I'll chek that out. Maybe I can...

Thanks Mike,
I'll chek that out. Maybe I can mount closer to tank and will use teflon tape when screwing in inlets and outlets to avoid leaks.

Joe
Replies: 9
Views: 1,756
Posted By thrasher

The instructions say to mount within 12 inches of...

The instructions say to mount within 12 inches of the bottom of fuel tank. Think I may use a larger plastic fuel filter and remount my pump lower on inside of front fender and possibly using some...
Replies: 2
Views: 1,182
Posted By thrasher

Ok we got it off. My dad put some tape on his...

Ok we got it off. My dad put some tape on his pry bar and pried on the plastic idler pulley but I don't like it, go to be an easier way.
Replies: 2
Views: 1,182
Posted By thrasher

"89" Ford F150 fan belt removal?

Trying to get fan belt off to replace water pump. There is a hub with a spring in it above an idler pulley. I was told to tighten the bolt on the spring hub with breaker bar and it would pull the...
Replies: 9
Views: 1,756
Posted By thrasher

It's a Purolator POSI-FLO PRO 06SV, I bought it a...

It's a Purolator POSI-FLO PRO 06SV, I bought it a Kragens.

Joe
Replies: 9
Views: 1,756
Posted By thrasher

Electric fule pump conversion, 65 Ranchero

Replaced my mechanical fuel pump with an electric pump rated at 4-7 psi on my 65 Ranchero with a 289 and 2 barrel carburator. Problem is when I park on an incline pump will tick loudly for a minute...
Replies: 6
Views: 31,068
Posted By thrasher

How do you balance ceiling fan?

Celing fan out of balance, very wobbly. How do I place weights to get into balance?

Joe
Replies: 2
Views: 1,486
Posted By thrasher

I found an online review and don't think I would...

I found an online review and don't think I would buy one at any price.
Replies: 2
Views: 1,486
Posted By thrasher

Wagner Work Crew airless sprayer, any good?

I need an airless type paint sprayer to paint house interior as well as exterior. Has anybody have any experience with this unit? Don't plan to use it as a business, just need it for personal use....
Replies: 2
Views: 1,685
Posted By thrasher

Yeah, I'm going to vent thru exterior wall as per...

Yeah, I'm going to vent thru exterior wall as per instructions. Assesability to gas line won't be a problem either.

Thanks.
Joe
Replies: 2
Views: 1,685
Posted By thrasher

Direct vent furnace,flue up through interior wall?

Any thing wrong with elbowing flue pipe of direct vent furnace up through interior wall to roof?

Joe
Replies: 4
Views: 976
Posted By thrasher

Good point Kartracer55, looks like the most...

Good point Kartracer55, looks like the most likely problem. Thanks for the input.
Replies: 4
Views: 976
Posted By thrasher

Good compression would not be indicative of blown...

Good compression would not be indicative of blown head gasket.
Replies: 4
Views: 976
Posted By thrasher

water in oil "71" Volvo Pinta marine engine

Recently rebuilt engine, good compression, four cylinder engine. Is there anyting that I can check, short of tearing the engine down again? Perhaps something to do with impeller of water pump. No...
Showing results 1 to 17 of 17


 
Forum Jump